检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:何丽娟[1] 王飒 吴夏梦 李松波 HE Li-Juan;WANG Sa;WU Xia-Meng;LI Song-Bo(School of Energy and Environment,Inner Mongolia University of Science and Technology,Baotou 014010,China)
机构地区:[1]内蒙古科技大学能源与环境学院,包头014010
出 处:《工程热物理学报》2021年第6期1378-1383,共6页Journal of Engineering Thermophysics
基 金:国家自然科学基金项目(No.51106068,No.51566014);内蒙古自治区自然科学基金项目(No.2015MS0547);内蒙古自治区科技创新引导奖励资金项目(No.2017CXYD-1)。
摘 要:针对离子液体[BMP][Tf_(2)N]的物性数据缺乏的问题,本文在101.325 KPa下对[BMP][Tf_(2)N]在温度范围为278.15~338.15 K的黏度和温度范围为298.15~338.15 K的密度、电导率进行了实验测定,结果表明:黏度、密度和电导率均受温度的影响较大,当压力一定时,[BMP][Tf_(2)N]的黏度、密度随温度的升高而减小;而电导率随温度的升高而增大;通过选择分别用Arrhenius方程、自然对数方程和VFT方程关联[BMP][Tf_(2)N]的黏度、密度和电导率;结果表明:模型值与实验值的最大相对误差和平均相对误差分别是2.25%和0.94%;5.74%和5.399;4.41%和4.24%。In view of the lack of physical property data of ionic liquid[BMP][Tf_(2)N],the viscosity of[BMP][Tf_(2)N]in the temperature range of 278.15~338.15 K and the density and conductivity of[BMP][Tf_(2)N]in the temperature range of 298.15~338.15 K were measured experimentally at 101.325 KPa.The results show that viscosity,density and conductivity are greatly affected by temperature.When the pressure is constant,the viscosity and density of[BMP][Tf_(2)N]decrease with the increase of temperature,while the conductivity increases with the increase of temperature.The viscosity,density and conductivity of[BMP][Tf_(2)N]were correlated by Arrhenius equation,natural logarithm equation and VFT equation;The results show that the maximum and average relative errors of the model and experimental values are 2.25%and 0.94%,5.74%and 5.39%,4.41%and 4.24%,respectively.
关 键 词:离子液体[BMP][Tf_(2)N] 黏度 密度 电导率 实验测定
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.15