共晶高熵合金形成的热力学基础研究  

Basic Thermodynamic Research of Eutectic High Entropy Alloys Formation

作　　者：李亚豪 唐宇[1] 叶益聪[1] 李顺[1] 万红[1] 刘希月 朱利安[1] 王震[1] 白书欣[1] Li Yahao;Tang Yu;Ye Yicong;Li Shun;Wan Hong;Liu Xiyue;Zhu Li’an;Wang Zhen;Bai Shuxin(National University of Defense Technology,Changsha 410073,China)

机构地区：[1]国防科技大学,湖南长沙410073

出　　处：《稀有金属材料与工程》2021年第5期1635-1640,共6页Rare Metal Materials and Engineering

基　　金：国家自然科学基金(51802345);湖南省自然科学基金(2019JJ40338)。

摘　　要：通过收集并总结已报道的18种共晶高熵合金的整体成分和各相成分等信息分别计算了反映其性质的一些参数,包括混合焓、混合熵、吉布斯自由能、原子尺寸失配度、电负性差和价电子数,并从热力学角度分析了这些参数对合金结构的影响规律。发现共晶高熵合金整体成分计算出的混合熵等值均基本满足传统高熵合金形成单相固溶体的结构判据要求(即△Smix>11 J/(mol×K)、-15 kJ/mol<ΔHmix<5 kJ/mol,δ<6.6%等),但是由于其共晶相的平均自由能低于其整体形成单相时的总自由能,这使得共晶高熵合金在凝固过程中发生共晶反应,形成多相结构。By collecting and summarizing the reported overall composition and phase composition of 18 kinds of eutectic high-entropy alloys(EHEAs),some parameters reflecting their properties were calculated,including mixing enthalpy,mixing entropy,Gibbs free energy atomic size mismatch,electronegativity difference and valence electron concentration,and the influence of these parameters on the structure of the alloy were analyzed from a thermodynamic point of view.It is found that the calculated mixing entropy equivalent of the overall composition of the eutectic high-entropy alloy basically meets the structural criterion requirements of the traditional high-entropy alloy(such asΔSmix>11 J/(mol·K),-15 kJ/mol<ΔHmix<5 kJ/mol,δ<6.6%)to form a single-phase solid solution.But the average free energy of the eutectic phase is lower than the total free energy when the whole forms a single phase,so the eutectic reaction occurs in the solidification process of the eutectic high-entropy alloy forming a multi-phase structure.

关 键 词：共晶高熵合金 热力学研究 成分和结构 

分 类 号：TG139[一般工业技术—材料科学与工程]