检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:胡子康 姜来 王辉[1] 王文娣[1] 唐娟[1] 张亭亭 霍晓静[1] HU Zikang;JIANG Lai;WANG Hui;WANG Wendi;TANG Juan;ZHANG Tingting;HUO Xiaojing(School of Mechanical and Electrical Engneering,Hebei Agricultural University,Baoding Hebei 071000,China)
机构地区:[1]河北农业大学机电工程学院,河北保定071000
出 处:《东北农业大学学报》2021年第6期78-86,共9页Journal of Northeast Agricultural University
基 金:河北省重点研发计划项目(20327220D);河北省现代农业产业技术体系蛋鸡肉鸡创新团队建设项目(HBCT2018060204)。
摘 要:为解决规模化养殖场人工识别捡拾死鸡劳动强度大、效率低等问题,以3~7周周龄笼养肉鸡为操作对象,基于欠驱动理论设计3关节4指死鸡捡拾机器人末端执行器。在肉鸡体尺测量、力学特性测量基础上,采用ADAMS建立机械指参数化模型与肉鸡模型,并依据目标函数、设计变量和约束条件开展机械指结构优化,优化结果显示目标函数增大28.6%。针对3周龄与7周龄肉鸡作末端执行器运动仿真抓取试验,结果表明,机械手传动平稳,机械手结构设计合理。利用机械手试验样机,抓取死亡30 min内肉鸡平均成功率为88.3%,死亡30 min以上肉鸡平均成功率为96.7%以上,平均抓取时间32 s,机械手有较高工作效率,达到设计目标。In order to solve the problems of high labor intensity and low efficiency in manual identification and picking up dead chickens in large-scale farms,this paper designed a 3-joint and 4-finger end-effector of the robot based on the underactuated theory,taking the cage broilers aged 3-7 weeks as the operating object.Based on the measurement of body size and mechanical properties of broilers,the mechanical finger parameterized model and the broiler finger model were established by ADAMS,and the mechanical finger structure was optimized according to the objective function,design variables and conditions.The optimization results showed that the objective function increased by 28.6%.The end-effector motion simulation grasping experiment was carried out for broilers aged3 weeks and 7 weeks.The results show that the manipulator had stable transmission and good grasping effect.The robot hand test prototype was used to grasp the dead chickens.The average success rate of the robot grasping the broilers within 30 minutes of death was 88.3%,and the average success rate of the broiler chickens beyond 30 minutes of grasping death was over 96.7%,and the average grasping time was over 96.7%,It was 32 s,and the manipulator had higher working efficiency and reached the design goal.
分 类 号:TP241.3[自动化与计算机技术—检测技术与自动化装置]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.144.230.138