检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:杨春梅[1] 王成[1] 杨硕 夏鹏 YANG Chun-mei;WANG Cheng;YANG Shuo;XIA Peng(Forestry and Woodworking Machinery Engineering Technology Center,Northeast Forestry University,Harbin 150040,Heilongjiang,China)
机构地区:[1]东北林业大学林业与木工机械工程技术中心,黑龙江哈尔滨150040
出 处:《西北林学院学报》2021年第4期289-296,共8页Journal of Northwest Forestry University
基 金:黑龙江省应用技术研究与开发计划项目(GA19A402);中央高校基本科研业务费专项资金项目(2572020DY12)。
摘 要:目前我国天然林、大径级木材日益匮乏,小径级木材成为主要制材原料,针对小径材加工利用效率不高且精度低等问题,提出数控小径材纵向弧面指接机总体结构的设计。通过分析纵向弧面指接机的加工工艺,拟定设备的总体方案,对数控小径材纵向弧面指接机总体结构进行实体建模,完成数控小径材纵向弧面指接机固定端总成、移动端总成以及底架总成的结构设计,并对粗铣主轴组件以及抛光主轴组件进行设计计算,得到粗铣电机功率4 kW、抛光电机功率3 kW,符合设备的设计要求。运用ANSYS对粗铣主轴进行静力学分析,得到主轴的应力、变形以及应变云图,其最大应力值为5.6224 MPa,最大变形量为0.0017078 mm,最大应变值为0.031479 mm/m,均在安全范围内,验证了主轴设计的合理性。因此,该机能够有效解决小径材出材率低的问题。At present,the small diameter woods become the main raw material resources for the manufacture of wood products due to the shortages of large diameter woods and natural forest and in China.Aiming to solve the problems of low efficiency and low precision in processing and utilization of small diameter wood,in this paper,the overall structure design of CNC finger jointer for longitudinal cambered surface of small diameter wood was presented.Based on the analysis of the machining technology of the finger jointer for longitudinal cambered surface,the overall scheme of the equipment was formulated.The solid model of the overall structure of the CNC finger jointer was established.The structure design of the fixed end assembly,the moving end assembly and the base assembly of the CNC finger jointer were accomplished.According to the design and calculation of rough milling spindle assembly and polished spindle assembly,the power of coarse milling motor was 4 kW and the power of polishing motor was 3 kW,which accorded with the design requirements of the equipment.Finally,the statics of the rough milling spindle were analyzed by ANSYS,and the stress,displacement and strain cloud diagrams of the spindle were obtained.The maximum stress was 5.6224 MPa,the maximum deformation was 0.0017078 mm,and the maximum strain was 0.031479 mm/m,within the scope of safety.It testified the rationality of spindle design.Therefore,the machine can effectively solve the problem of low yield of processing small diameter wood.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.26