体育器械用微孔发泡塑料聚丙烯制备研究  

Preparation of Microcellular Foamed Polypropylene Plastics for Sports Equipment

作　　者：薛鑫 Xue Xin(Xi'an Aeronautical Polytechnic Institute,Xi'an,Shanxi,710000,China)

机构地区：[1]西安航空职业技术学院,陕西西安710000

出　　处：《塑料助剂》2021年第3期46-49,共4页Plastics Additives

摘　　要：为应对聚丙烯熔体强度偏低,难以发泡的问题,以高熔体强度树脂与聚丙烯共混,制备了微孔发泡塑料聚丙烯,并对其性能进行了测试分析。结果表明:以POE作为提高聚丙烯熔体强度的弹性体,与聚丙烯共混所制成的微孔发泡聚丙烯力学性能最佳;以纤维状结构的硫酸钙晶须作为成核剂制成的微孔发泡聚丙烯、发泡效果最佳;在发泡剂掺量增加时,微孔发泡塑料聚丙烯的力学性能与发泡效果均是先变好后变差,其中在掺量为0.5%时,整体性能最佳。In order to solve the problem of low melt strength and difficult foaming of polypropylene,the microcellular foaming polypropylene plastics was prepared by blending high melt strength resin with polypropylene,and its properties were tested and analyzed.The results showed that the microcellular foaming polypropylene plastics was prepared by blending high melt strength resin with polypropylene,and POE was used as the resin to improve the melt strength of polypropylene plastics.The results show that the mechanical properties and foaming effect of microcellular foamed polypropylene plastics are the best;the mechanical properties and foaming effect of microcellular foamed polypropylene plastics prepared with fibrous calcium sulfate whisker as nucleating agent are the best;when the content of the foaming agent increases,the mechanical properties and foaming effect of microcellular foamed plastic polypropylene will first get better and then get worse,and the overall performance will be the best when such content is 0.5%.

关 键 词：体育器械 聚丙烯 熔体强度 微孔发泡塑料 力学性能 

分 类 号：TQ328[化学工程—合成树脂塑料工业] TS952[轻工技术与工程]