V形犁式无沟铺管机牵引力需求  

Tractive force requirement of V-plow drain-pipe installation machine

作　　者：郭大方 陈坤[1,2] 胡小安 耿冠杰[1,2] 姚强 杨录录 周坤雷 Guo Dafang;Chen Kun;Hu Xiao’an;Geng Guanjie;Yao Qiang;Yang Lulu;Zhou Kunlei(Chinese Academy of Agricultural Mechanization Sciences,Beijing 100083,China;Beijing Tsun Greatwall Hydraulic R&D Co.Ltd.,Beijing 100083,China)

机构地区：[1]中国农业机械化科学研究院,北京100083 [2]北京天顺长城液压科技有限公司,北京100083

出　　处：《农业工程学报》2021年第10期46-53,共8页Transactions of the Chinese Society of Agricultural Engineering

基　　金：国家重点研发计划项目(2016YFC0501305)。

摘　　要：V形犁式无沟铺管机结构简单、施工效率高、成本低,是黄河冲积平原适宜的暗管施工装备,其牵引力需求与暗管埋深的关系是整机设计的理论基础。该研究基于V形犁式无沟铺管机结构与原理,通过分析犁具工作阻力与履带行驶阻力,构建牵引力需求力学模型。结合现场特定的土壤物理性质,采用有限元与光滑粒子流体动力学耦合法,完成显式动力学仿真,得出暗管埋深为0.4、0.6、0.8、1.2和1.6 m时的犁体工作阻力分别为35.65、55.71、111.06、201.80和313.22 kN,回归结果验证了理论分析。结合机器传动系统特点,通过检测牵引功率和车速获取不同埋深作业时的牵引力大小,基于中心复合设计方法开展牵引力试验研究。试验结果表明,暗管埋深与其平方项对牵引力需求的影响显著(P<0.001),作业速度及其与埋深交互项影响不显著(P>0.05);犁体工作阻力的试验与仿真回归模型的最大相对误差不超过20%,表明仿真结果真实可信。研究方法与结论可为针对不同土壤条件、不同管径和不同埋深,研发V形犁式暗管铺设机器提供设计参考。A V-shaped plow has widely been expected to serve as a cost-effective trenchless drain-pipe installation machine in the subsurface drainage over the decades of application in European countries,due to its simple structure,high working efficiency,and low operation cost.The unique characteristics make it particularly suitable for the construction of subsurface drainage systems in alluvial plains along the Yellow River,where the underground water table is shallow,and the soil is unstable.A prototype machine was firstly developed in China at the beginning of the 13th Five-Year Plan period in 2016.In this study,a systematic investigation has been conducted on the tractive force requirement at different depthes in the pipe installation,thereby verifying the performance of the machine.A dynamic analysis was made to clarify the working resistances(consisting of soil-cutting,soil-lifting,and soil-metal friction resistance),and the traveling resistance(consisting of soil compaction,bulldozing,and friction resistance)using the mechanical structure and working principle.Two major components also constituted the total requirement of tractive force.A mathematical model was then established to describe the relationship of tractive force requirement with the plow body specifications,soil physical properties,and drain-pipe depth.The model indicated that the tractive force requirement was the second power in the pipe installation depth,particularly with the primary and quadratic terms resulted from the plow working resistance and the constant term from the track traveling resistance.A prototype machine was used to collect the soil physical data from the Shantun Village,some 80 km to the lower reaches of Huanghe River in Shandong Province of China.A Finite Element Method(FEM)and Smooth Particle Hydrodynamics(SPH)were combined for the dynamic simulations at different installation depths.The results showed that the curve of working resistance was in good conformance to the general law of plow-body and soil interaction.Specifically,th

关 键 词：农业机械 仿真 试验 无沟铺管机 牵引力需求 

分 类 号：S222.5[农业科学—农业机械化工程]