微型燃气轮机燃烧室流场数值分析与试验研究  

Numerical Analysis and Experiment Research on Flow Field of a Micro-gas Turbine Combustor

作　　者：乔卿贝 方传宇 穆勇[1,2,3] 刘富强 刘存喜[1,2,3] 徐纲[1,2,3] Qiao Qingbei;Fang Chuanyu;Mu Yong;Liu Fuqiang;Liu Cunxi;Xu Gang(Institute of Engineering Thermophysics,Chinese Academy of Sciences,Beijing 100190,China;University of Chinese Academy of Sciences,Beijing 100190,China;Innovation Academy of Light-duty Gas Turbine, Chinese Academy of Sciences, Beijing 100190,China)

机构地区：[1]中国科学院工程热物理研究所,北京100190 [2]中国科学院大学,北京100190 [3]中国科学院轻型动力创新研究院,北京100190

出　　处：《燃气轮机技术》2021年第3期28-32,62,共6页Gas Turbine Technology

基　　金：基于激光诱导荧光及吸收光谱融合的瞬态燃烧场定量测量装置(61827802);国家科技重大专项(2017-Ⅲ-0007-0032)。

摘　　要：采用CFD方法对微型燃气轮机蒸发管燃烧室进行结构设计和流场分析,采用试验方法进行验证,主要考查设计点状态下的燃烧效率、压力损失、燃烧室出口温度场分布不均匀系数FOTD与出口温度场径向不均匀度FRTD。对比分析燃烧室出口温度的CFD与试验结果,二者吻合较好。试验表明:该燃烧室燃烧效率为99.6%,压力损失为4.3%,出口温度平均后的FOTD为0.102,FRTD为0.067。The structure design and flow field analysis of a vaporizing combustor in the micro-gas turbine was studied by the CFD method,and the result was validated by the experiment.The parameters as combustion efficiency,pressure loss,factor of outlet temperature distribution(FOTD)and factor of radial temperature distribution(FRTD)were surveyed at the design point.Compared with the FOTD and FRTD between CFD and experiment,they were almost in the same level and tendency.The result showed that the combustion efficiency was 99.6%,pressure loss was 4.3%,FOTD was 0.102 and FRTD was 0.067 with an average value of temperature at outlet.

关 键 词：微型燃气轮机 燃烧室 数值分析 试验 

分 类 号：TK16[动力工程及工程热物理—热能工程]