基于广播方式的无线软件升级方法  

Wireless software upgrade method based on broadcast mode

作　　者：王飞[1,2] WANG Fei(Sitate Key Laboratory of Gas Disaster Detecting,Prerenting and Emergency Controlling,Chongying 400037,China;China Coal Technology&Engineering Group Chonging Research Institute,Chongging 400039,China)

机构地区：[1]瓦斯灾害监控与应急技术国家重点实验室,重庆400037 [2]中煤科工集团重庆研究院有限公司,重庆400039

出　　处：《煤矿安全》2021年第10期142-145,共4页Safety in Coal Mines

基　　金：2020年重庆市技术创新与应用发展专项面上资助项目(cstc2020jscx-msxmX0136)。

摘　　要：提出了一种基于广播方式的无线软件升级的实现方案,该方法采用一对多的组网模式和无限循环多次广播机制,实现定位卡批量无线升级,提高了无线升级的速度、并发容量和效率。试验结果表明:定位卡批量升级的并发数量不受限制,在100 m覆盖范围内,95%定位卡一次性升级成功,5%定位卡需要等待2个循环周期,无线升级时间均小于5 min。因此,该方法为数量较多的定位卡升级固件程序提供了一种快速、可靠和便捷的无线升级方法。This paper proposes an implementation scheme of wireless upgrade firmware program based on UWB and ZigBee technologies. This method adopts one-to-many networking mode and infinite loop multi-broadcast mechanism to realize the location card batch wireless upgrade, which improves the speed, concurrent capacity and efficiency of wireless upgrade. The test results show that the concurrent number of locating card in batch upgrade is not limited. Within the coverage area of 100 meters,95% locating cards are successfully upgraded once, 5% locating cards need to wait for two cycles, and the wireless upgrade time is less than 5 minutes. Therefore, this method provides a fast, reliable and convenient wireless upgrade way for a large number of locating card upgrade firmware programs.

关 键 词：UWB ZIGBEE 无线升级 循环广播 批量升级 精确定位 

分 类 号：TD76[矿业工程—矿井通风与安全]