细支卷烟片烟原料的片形需求分析  

Analysis on the lamina shape requirement of flaky tobacco for slim cigarettes

作　　者：田震 胡宗玉 许强[1] 张玉海[2] 纪铭阳 陈超 黄长庚 葛霓志 徐如彦[1] TIAN Zhen;HU Zong-yu;XU Qiang;ZHANG Yu-hai;JI Ming-yang;CHEN Chao;HUANG Chang-geng;GE Ni-zhi;XU Ru-yan(China Tobacco Jiangsu Industrial Co.,Ltd.,Nanjing,Jiangsu 210019,China;Zhengzhou Tobacco Research Institute of CNTC,Zhengzhou,Henan 450001,China;Hua Huan International Tobacco Co.,Ltd.,Chuzhou,Anhui 233121,China;Fujian Sanming Gold Leaf Redrying Co.,Ltd.,Sanming,Fujian 365001,China;Yunnan Tobacco Redrying Co.,Ltd.,Kunming,Yunnan 650000,China)

机构地区：[1]江苏中烟工业有限责任公司,江苏南京210019 [2]中国烟草总公司郑州烟草研究院,河南郑州450001 [3]华环国际烟草有限公司,安徽滁州233121 [4]福建省三明金叶复烤有限公司,福建三明365001 [5]云南烟叶复烤有限责任公司,云南昆明650000

出　　处：《食品与机械》2021年第10期161-166,共6页Food and Machinery

基　　金：江苏中烟科技项目(编号:201904)。

摘　　要：目的:确定细支卷烟片烟原料的片形需求。方法:应用图像分析技术系统开发了6种片形表征方法,综合片形系数数值与视觉感官判定结果的符合度确定适宜的片形表征方法,以江苏中烟烟叶区域加工中心片烟原料为材料建立片烟片形系数数据库,通过建立模拟切丝模型开展片烟片形需求模拟研究,并制备114个样品进行片烟片形需求试验研究。结果:①圆度率法可作为适宜的片形表征方法;②片形系数<0.35时,碎丝率最大;③片形系数>0.428时,碎丝率基本在2%以下。结论:建议细支卷烟片烟原料的片形系数应大于0.428。Objective:This study focus on determining the lamina shape requirement of flaky tobacco in slim cigarettes.Methods:Six characterization methods of lamina shape were systematically developed by image analysis technique,and the most suitable characterization method of leaf blade shape was determined by the conformance of lamina shape coefficient and visual decision.The lamina shape coefficient database was established by using flaky tobacco from the regional processing center of China Tobacco Jiangsu Industrial Co.,Ltd..Simulation Study on the requirement of lamina shape was conducted based on simulation cutting model,and 114 samples were prepared to discuss the requirement of lamina shape in the laboratory.Results:The results were showed as follows:①The"Roundness Rate"was the most suitable characterization method of lamina shape.②There was the largest broken filament rate when the lamina shape coefficient was less than 0.35.③When the lamina shape coefficient was greater than 0.428,the broken filament rate was basically under 2%.Conclusion:It is recommended that the lamina shape coefficient of slim cigarettes should be greater than 0.428.

关 键 词：细支卷烟 表征方法 片形系数 碎丝率 

分 类 号：TS42[农业科学—烟草工业]