基于ANSYS软件的机械密封波纹管失弹特性研究  

Research on the Inelastic Characteristics of Mechanical Seal Bellows Based on ANSYS

作　　者：于涛[1] 阎雷雨 YU Tao;YAN Lei-yu(Xi'an Aeronautical Polytechnic Institute,Xi'an 710000 China;Technical Equipment Design Institute of Manufacturing Engineering Department of AVIC Aircraft Co.,Ltd.,Xi'an 710089 China)

机构地区：[1]西安航空职业技术学院,陕西西安710000 [2]中航飞机股份有限公司制造工程部技术装备设计所,陕西西安710089

出　　处：《自动化技术与应用》2021年第11期149-152,共4页Techniques of Automation and Applications

摘　　要：本文基于ANSYS软件研究了机械密封波纹管的失弹特性,以轴向端面压力(压缩位移)、组合力、温度、力热总载荷要素在波纹管弹性弹性中的影响机制分析,了解波纹管失弹特性。通过计算分析,结果表明多种力载荷作用与热载荷作用对于机械密封波纹管弹性性能的影响都不容忽视;在载荷作用不同形式下,机械密封波纹管最大应力强度与压缩位移之间为正相关关系,且波纹管最大允许压缩位移存在一定差异。Based on the ANSYS software,this paper studies the inelastic characteristics of mechanical seal bellows,and analyzes the influence mechanism of axial end pressure(compression displacement),combined force,temperature,total load of force and heat on the elastic elasticity of bellows to understand the inelastic characteristics of bellows.Through calculation and analysis,the results show that the effects of various force and thermal loads on the elastic properties of mechanical seal bellows can not be ignored;under different forms of load,the maximum stress intensity and compression displacement of mechanical seal bellows are positively correlated,and the maximum allowable compression displacement of bellows is different.

关 键 词：ANSYS软件 机械密封 波纹管 失弹特性 

分 类 号：TH117.1[机械工程—机械设计及理论]