基于模糊免疫PID定型机拉伸张力控制技术  

Stretching Tension Control Technology Based on Fuzzy Immune PID Setting Machine

作　　者：岳跃腾 赵世海 YUE Yue-teng;ZHAO Shi-hai(Tianjin Key Laboratory of Advanced Mechatronics Equipment Technology, School of Mechanical Engineering, Tiangong University, Tianjin 300387, China)

机构地区：[1]天津工业大学机械工程学院,天津市现代机电装备技术重点实验室,天津300387

出　　处：《科学技术与工程》2021年第31期13454-13460,共7页Science Technology and Engineering

基　　金：天津市科技支撑重点计划(15ZCDGX00840)。

摘　　要：为了解决常规PID(proportion,integral,differential)算法在定型机定型过程中动态性能差和抗干扰弱等问题,采用了在常规PID算法的基础上引入模糊免疫算法的方案,并设计了一种模糊免疫PID控制器。通过MATLAB软件搭建网络模型进行仿真分析,此方法满足定型机拉伸张力的各项技术要求,使系统的超调下降到1.6%,基本接近无超调,到达稳定时间缩短至4 s,且张力所受外部扰动影响很小。经实验结果显示,定型机拉伸张力控制在设定值±2%之内,符合系统的要求并控制在系统的误差范围之内。因此模糊免疫PID控制器有效地改善了定型机中拉伸张力的技术问题,可以满足生产需求。In order to solve the problems of poor dynamic performance and weak anti-interference of conventional PID(proportion,integral,differential)algorithm in the setting process of shaping machine,a scheme of introducing fuzzy immune algorithm on the basis of conventional PID algorithm was adopted,and a fuzzy immune PID controller was designed.Through the simulation analysis of the network model built by MATLAB software,this method met the technical requirements of the stretching tension of the setting machine,and reduced the overshoot of the system to 1.6%,which was basically close to no overshoot,the time to reach stability was shortened to 4 s,and the tension was seldom affected by external disturbances.The experimental results show that the drawing tension of the setting machine is controlled within±2%of the set value,meeting the requirements of the system within the error range of the system.It is concluded that the fuzzy immune PID controller effectively improves the technical problems of tensile tension in the setting machine and can meet the production demand.

关 键 词：定型机 拉伸张力 模糊免疫PID 抗干扰 

分 类 号：TS103.7[轻工技术与工程—纺织工程]