偏心轮式抽油机用套筒-长杆滑槽接触分析及套筒母线修形  

Sleeve-long rod chute contact analysis and sleeve busbar modification for eccentric wheel pumping unit

作　　者：胡国栋 邵军 程寓 王德伟 HU Guodong;SHAO Jun;CHENG Yu;WANG Dewei(Mechanical Engineering College,Xi’an Shiyou University,Xi’an 710065,China;Jinzhou Oil Production Plant,Petro China Liaohe Oilfield Company,Jinzhou 121209,China)

机构地区：[1]西安石油大学机械工程学院,西安710065 [2]中国石油辽河油田公司锦州采油厂,锦州121209

出　　处：《现代制造工程》2021年第11期76-80,9,共6页Modern Manufacturing Engineering

基　　金：工信部项目(工信部联装[2016]24号);西安石油大学研究生创新与实践能力培养计划资助项目(YCS19222029)。

摘　　要：偏心轮式抽油机换向机构中的套筒-长杆滑槽存在高副,其承载能力关系整机安全性及使用寿命,鉴于此,对其进行有限元接触分析。利用有限元分析套筒-长杆滑槽高副,采用折线法进行套筒母线修形,降低套筒两端的应力集中。有限元接触分析后表明,在套筒端部存在应力集中,采用折线法进行套筒母线修形后降低了套筒两端的应力集中,在实际加工生产该套筒时,设计其最佳接触线长度为0.495 m。同时,研究为后续结构优化提供了数据参考。In the reversing mechanism of eccentric wheel pumping unit,there is a high pair of sleeve-long rod chute,and its bearing capacity is related to the safety and service life of the whole machine.The finite element method was used to analyze the high pair of sleeve-long rod chute,and the broken line method was used to modify the sleeve busbar to reduce the stress concentration at both ends of the sleeve busbar.The finite element contact analysis shows that the stress concentration exists at the end of the sleeve,and the stress concentration at both ends of the sleeve was reduced after the sleeve busbar was modified by the broken line method.The optimum contact line length is 0.495 m when the sleeve is actually manufactured.At the same time,the research provides data reference for the subsequent structure optimization.

关 键 词：偏心轮式 套筒-长杆 高副 有限元 折线法 套筒母线修形 应力集中 

分 类 号：TE933[石油与天然气工程—石油机械设备]