电解铜箔生产含铜络合废水深度处理工艺研究  

Study on advanced treatment technology of copper complex wastewater from electrolytic copper foil production

作　　者：付赞辉 陆峰 FU Zan-hui;LU Feng(Ganzhou Yihao New Material Co.,Ltd,JiangXi GanZhou,341000)

机构地区：[1]赣州逸豪新材料股份有限公司,江西赣州341000

出　　处：《世界有色金属》2021年第16期168-169,共2页World Nonferrous Metals

摘　　要：本文主要研究了电解铜箔生产过程中络合废水的处理工艺,分析了酸化pH、酸化时间、氯化钙添加量、中和沉淀pH对络合废水处理效果的影响,试验结果表明,最佳处理工艺为酸化pH值2-3,酸化时间30min,氯化钙添加量为理论量的1.2倍,中和沉淀pH为8.0,经此工艺处理后废水可达国家综合废水排放标准GB8978-1996中的一级排放标准。This paper mainly studies the treatment process of complexation wastewater in the production of electrolytic copper foil,and analyzes the effects of acidification pH,acidification time,calcium chloride addition and neutralization precipitation pH on the treatment effect of complexation wastewater.The test results show that the best treatment process is acidification pH 2-3,acidification time 30min,calcium chloride addition 1.2 times the theoretical amount,neutralization precipitation pH 8.0,The wastewater treated by this process can reach the first-class discharge standard in the national comprehensive wastewater discharge standard GB8978-1996.

关 键 词：电解铜箔 含铜络合废水 处理 

分 类 号：X703[环境科学与工程—环境工程]