检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:吴克川 陶忠[2] 潘文[2] 白羽[2] 余文正 WU Kechuan;TAO Zhong;PAN Wen;BAI Yu;YU Wenzheng(College of Architecture and Civil Engineering,Kunming University,Kunming 650214,China;Civil Engineering Institute,Kunming University of Science and Technology,Kunming 650500,China)
机构地区:[1]昆明学院建筑工程学院,云南昆明650214 [2]昆明理工大学土木工程系,云南昆明650500
出 处:《建筑结构学报》2021年第12期43-54,共12页Journal of Building Structures
基 金:国家科技重大专项(2017YFC0707603);国家自然科学基金项目(51368027);昆明学院人才引进项目(YJL19011)。
摘 要:为研究不同刚度比防屈曲支撑(buckling-restrained brace,BRB)钢筋混凝土框架的抗震性能,设计并制作了3榀BRB水平刚度与主体框架抗侧刚度比值分别为3、5、7的减震框架,通过低周往复荷载试验,对比研究其耗能减震能力、破坏形态、BRB连接节点及节点板性能、BRB转动变形性能、BRB端部附加弯矩产生机制等,探讨与BRB连接的梁、柱构件设计方法。研究结果表明:3榀框架滞回曲线饱满,耗能能力稳定,随着刚度比的增加,屈服荷载及极限荷载提高,BRB连接节点破坏越严重;BRB连接节点板的存在使框架柱塑性铰位置由柱端移至节点板趾部附近区域;水平荷载作用下,各框架中BRB端部由于转动变形产生附加弯矩,转动变形与层间位移角近似呈线性变化关系;加强消能子结构的延性构造措施是实现大变形下BRB充分耗能的有效途径。To study the influence of stiffness ratio on the seismic performance of buckling restrained braced(BRB)-reinforced concrete frames,three BRB frames with stiffness ratios of three,five,and seven were designed and tested.Based on low-cycle reversed loading,the energy dissipation capacity,failure mode,mechanical performance of BRB connection joint and gusset plate,rotational deformation performance of BRB,mechanism of bending moment at end of BRB were studied.Furthermore,the design method of beam and column connected to BRB was discussed.The test results show that all the specimens develop excellent hysteretic behavior with plump hysteretic curves and stable energy dissipation.With the increase of stiffness ratio,the yield capacity and ultimate capacity of the structure are improved,while the damage of the BRB connection joint is more serious.The location of the plastic hinge is transferred to the toe of the gusset plate from the end of the column due to the existence of gusset plate.Under horizontal load,additional bending moments are generated at the end of BRB due to the rotational deformation,and the relationship between the rotational deformation and the inter-story drift ratio is approximately linear.It is an effective way to achieve the full energy dissipation of BRB under large deformation by improving the ductility of the energy dissipating substructure.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.38