Optimization of the fused deposition modeling-based fabrication process for polylactic acid microneedles  

作　　者：Libo Wu Jongho Park Yuto Kamaki Beomjoon Kim 

机构地区：[1]Institute of Industrial Science,The University of Tokyo,4-6-1 Komaba,Meguro-ku,Tokyo 153-8505,Japan

出　　处：《Microsystems & Nanoengineering》2021年第4期103-115,共13页微系统与纳米工程（英文）

摘　　要：A microneedle(MN)array is a novel biomedical device adopted in medical applications to pierce through the stratum corneum while targeting the viable epidermis and dermis layers of the skin.Owing to their micron-scale dimensions,MNs can minimize stimulations of the sensory nerve fibers in the dermis layer.For medical applications,such as wound healing,biosensing,and drug delivery,the structure of MNs significantly influences their mechanical properties.Among the various microfabrication methods for MNs,fused deposition modeling(FDM),a commercial 3D printing method,shows potential in terms of the biocompatibility of the printed material(polylactic acid(PLA))and preprogrammable arbitrary shapes.Owing to the current limitations of FDM printer resolution,conventional micron-scale MN structures cannot be fabricated without a post-fabrication process.Hydrolysis in an alkaline solution is a feasible approach for reducing the size of PLA needles printed via FDM.Moreover,weak bonding between PLA layers during additive manufacturing triggers the detachment of PLA needles before etching to the expected sizes.Furthermore,various parameters for the fabrication of PLA MNs with FDM have yet to be sufficiently optimized.In this study,the thermal parameters of the FDM printing process,including the nozzle and printing stage temperatures,were investigated to bolster the interfacial bonding between PLA layers.Reinforced bonding was demonstrated to address the detachment challenges faced by PLA MNs during the chemical etching process.Furthermore,chemical etching parameters,including the etchant concentration,environmental temperature,and stirring speed of the etchant,were studied to determine the optimal etching ratio.To develop a universal methodology for the batch fabrication of biodegradable MNs,this study is expected to optimize the conditions of the FDM-based fabrication process.Additive manufacturing was employed to produce MNs with preprogrammed structures.Inclined MNs were successfully fabricated by FDM printing with chemical

关 键 词：FUSED PRINTING BONDING 

分 类 号：R318[医药卫生—生物医学工程]