检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:许啸 马新建 张军[3] 沈妍 XU Xiao;MA Xin-jian;ZHANG Jun;SHEN Yan(School of Mechatronics and Power Engineering,Jiangsu University of Science and Technology(Zhangjiagang),Zhenjiang 212003,China;Shanghai Academy of Spaceflight Technology,Academy of Aerospace Solid Propulsion Technology,Shanghai 201109,China;College of Aerospace Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210001,China)
机构地区:[1]江苏科技大学张家港校区机电与动力工程学院,镇江212003 [2]上海航天技术研究院航天动力技术研究院,上海201109 [3]南京航空航天大学航空学院,南京210001
出 处:《工程力学》2022年第1期228-242,共15页Engineering Mechanics
基 金:国家自然科学基金青年科学基金项目(11902125);江苏省高等学校自然科学研究面上项目(18KJB130002);国家重点研发计划项目(2018YFC0310400)。
摘 要:针对直接模拟蒙特卡洛(DSMC)方法统计耗散较大而传统的信息保存(DSMC-IP)方法难以有效模拟强激波的问题,采用对流迎风分裂(AUSM)通量计算格式对IP方法进行改造。以局部马赫数为标准重构控制方程中的关联项通量,使计算更加准确的符合激波两侧的流动特征,从而形成一种具有较高统计精度和高超声速流动模拟能力的新型DSMC-IP方法。采用该方法对超声速圆柱和带扩张角的喷管高超声速流动进行数值模拟,结果显示,该方法与DSMC方法的计算结果相比,其流场结构基本相符,而前者的统计耗散明显更低,且流动特征更清晰,表面特征系数与实验值或参考值相差在5.5%以内,证明了该方法在高超声速稀薄流场模拟中的准确性和有效性。The Information Preservation(DSMC-IP)method is improved by using Advection Upstream Splitting Method(AUSM)splitting scheme,to solve the problems that the Direct Simulation of Monte Carlo(DSMC)method is effected by a large statistical dissipation,and that he traditional IP method cannot simulate the strong shock wave accurately.The fluxes of correlation terms in governing equations are reconstructed by local Mach numbers as the standard,so that the calculation is more accurate in accordance with the flow characteristics on both sides of the shock wave,thus forming a new DSMC-IP method with high statistical accuracy and hypersonic flow simulation ability.This method is utilized to simulate supersonic flow around the cylinder and hypersonic flow around the nozzle with divergent angle,the results of the AUSM splitting DSMC-IP method is basically consistent with the results of DSMC method,however the former has lower statistical scatter,and the flow characteristics are clearer.The surface characteristic coefficients differences between the results and the experiment or reference values are less than 5.5%.It is proved that the AUSM splitting DSMC-IP method is accurate and effective in the hypersonic flow simulation.
关 键 词:流体力学 数值计算方法 DSMC-IP方法 高超声速 AUSM格式 稀薄流动 通量分裂
分 类 号:V211.3[航空宇航科学与技术—航空宇航推进理论与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.17.173.228