检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:董方旭[1] 凡丽梅[1] 段剑[1] 赵付宝[1] 张霞[1] 孙良文 蒋志强 DONG Fangxu;FAN Limei;DUAN Jian;ZHAO Fubao;ZHANG Xia;SUN Liangwen;JIANG Zhiqiang(CNGC Institute 53,Jinan 250031,China)
机构地区:[1]中国兵器工业集团第五三研究所,济南250031
出 处:《兵器装备工程学报》2021年第S02期291-295,共5页Journal of Ordnance Equipment Engineering
摘 要:基于芳纶纸蜂窝板的结构特点,采用穿透法对侧检测模式的空气耦合超声C扫描技术,对影响蜂窝复合材料整体质量的夹芯缺陷进行无损成像检测。分析了纸蜂窝复合材料良好的物理特性,对无缺陷超声信号进行滤波处理、特征提取以及信噪比分析,确定滤波次数及成像参数。结果表明:经过16次平均降噪处理之后,选取时域最大值作为C扫描的成像参数,能够快速、有效、清晰地对纸蜂窝复合材料中的缺陷进行成像检测。Based on the structural characteristics of aramid paper honeycomb panel,the air coupled ultrasonic C-scan technology of penetration opposite side detection mode is used to detect the sandwich defects affecting the overall quality of honeycomb composites.The good physical properties of paper honeycomb composites were analyzed.The defect free ultrasonic signal was filtered,and feature extracted and signal-to-noise ratio was analyzed to determine the filtering times and imaging parameters.The results show that after 16 times of average noise reduction,selecting the time domain maximum as the imaging parameter of C-scan can image and detect the defects in paper honeycomb composites quickly,effectively and clearly.
关 键 词:纸蜂窝 空气耦合超声检测 穿透法 降噪 特征提取
分 类 号:TG115.28[金属学及工艺—物理冶金]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.127