利用高低潮推算乘潮水位的方法  

Method of calculating tide riding water level by high and low tide

作　　者：乔光全[1] 麦宇雄[1] 徐润刚[1] QIAO Guang-quan;MAI Yu-xiong;XU Run-gang(CCCC-FHDI Engineering Co.,Ltd.,Guangzhou 510290,China)

机构地区：[1]中交第四航务工程勘察设计院有限公司,广东广州510290

出　　处：《水运工程》2022年第1期35-40,共6页Port & Waterway Engineering

摘　　要：提出一种仅利用高低潮数据计算乘潮水位的新方法。以潮汐表中我国不同潮汐类型站点的高、低潮数据和逐时潮位数据为基础,采用按规范方法计算的结果对新方法的结果进行验证,从多角度分析计算误差。结果表明,新方法的计算结果误差多在10 cm以内,径流和浅水分潮影响明显区域的最大误差在20 cm左右,结果精度能够满足工程需求。此方法含义明确、公式简单、计算方便,可通过计算器或Excel软件简单求解,在缺乏逐时潮位数据的海区,可近似计算乘潮水位。We propose a new method to calculate the tide riding water level only using the high and low tide data.Based on the tide table s data of the high and low tide data and hourly tide level data from tidal stations of different tide types in China,we use the calculation results by the standard method to verify the results of this method,and analyze the calculation error from multiple aspects.The results show that most of the new method s errors are within 10 cm,and the maximum error is about 20 cm in the area which is obviously impacted by runoff and shallow water tidal component.Thus,the results of the new method can meet the engineering requirements.This method has clear physical meaning,simple formula and can be easily solved by calculator or Excel software.This method can be used to calculate the tide riding water level in the sea area lacking hourly tide level data.

关 键 词：高低潮 乘潮水位 误差分析 特征潮位曲线 三角函数 

分 类 号：U652.3[交通运输工程—港口、海岸及近海工程]