中子辐照对耐事故燃料FeCrAl合金力学性能的影响研究  

Effect of Neutron Irradiation on Mechanical Properties of Accident-Tolerant Fuel FeCrAl Alloys

作　　者：雷阳[1] 张海生[1] 毛建军 刘晓松[1] 乔英杰[2] 王鹏[2] 吴亚贞[1] 肖文霞 Lei Yang;Zhang Haisheng;Mao Jianjun;Liu Xiaosong;Qiao Yingjie;Wang Peng;Wu Yazhen;Xiao Wenxia(Nuclear Power Institute of China,Chengdu,610213,China;Harbin Engineering University,Harbin,150001,China)

机构地区：[1]中国核动力研究设计院,成都610213 [2]哈尔滨工程大学,哈尔滨150001

出　　处：《核动力工程》2022年第1期97-101,共5页Nuclear Power Engineering

基　　金：国家重点研发计划项目(2016YFB0700105)。

摘　　要：FeCrAl合金具有良好的抗高温氧化和力学性能,能够作为燃料包壳材料。为研究FeCrAl合金的辐照力学性能,开展了不同元素成分含量和2×10^(19) cm^(−2)、8×10^(19) cm^(−2)2种中子注量辐照下的FeCrAl合金力学性能试验,并在室温和380℃下测试了FeCrAl合金的拉伸性能,获得了不同Cr和Al含量FeCrAl合金的抗拉强度和屈服强度,并研究了Al含量、Cr/Al含量配比及中子辐照对FeCrAl合金力学性能的影响。研究表明,FeCrAl合金强度随着Al含量增加大致呈增加趋势;经2×10^(19) cm^(−2)中子辐照后,FeCrAl合金强度有较大提升;再经8×10^(19) cm^(−2)中子辐照后,FeCrAl合金强度升高不明显。该研究结果为耐事故燃料(ATF)包壳材料的研发选型提供了重要的数据支撑。FeCrAl alloy has good high-temperature oxidation resistance and mechanical properties and can be used as fuel cladding material.In order to study the irradiation mechanical properties of FeCrAl alloy,FeCrAl alloy mechanical properties test with different element contents and 2×10^(19) cm^(−2) and 8×10^(19) cm^(−2) neutron fluence irradiation was carried out,the tensile properties of FeCrAl alloys were tested at room temperature and 380℃,and the tensile strength and yield strength of FeCrAl alloys with different Cr and Al contents were obtained.The effects of Al content,Cr/Al content ratio and neutron irradiation on the mechanical properties of FeCrAl alloy were studied.The results show that the strength of FeCrAl alloy generally increases with the increase of Al content;After 2×10^(19) cm^(−2) neutron irradiation,the strength of FeCrAl alloy is greatly improved;After 8×10^(19) cm^(−2) neutron irradiation,the strength of FeCrAl alloy does not increase significantly.The research results provide important data support for the R&D and selection of accident-tolerant fuel cladding.

关 键 词：FeCrAl合金 耐事故燃料 力学性能 辐照效应 

分 类 号：TG139.4[一般工业技术—材料科学与工程]