多单点间隙下肘杆压力机运动学特性对比分析  

CoMParative Analysis of Kinematic Characteristics of Toggle Press with Multiple Single Point Clearance

作　　者：胡洪斌 钱伟 吴华伟 胡全[1] 吴钊 赵千[2,3] HU Hongbin;QIAN Wei;WU Huawei;HU Quan;WU Zhao;ZHAO Qian(Hubei Tri-Ring Forging Co.,Ltd.,Xiangyuan Hubei 441700,China;School of Automotive and Traffic Engineering,Hubei University of Arts and Sciences,Xiangyang Hubei 441053,China;Hubei Key Laboratory of Electric Vehicle Powertrain Design and Test,Hubei University of Arts and Science,Xiangyang Hubei 441053,China)

机构地区：[1]湖北三环锻造有限公司,湖北襄阳441700 [2]湖北文理学院汽车与交通工程学院,湖北襄阳441053 [3]湖北文理学院纯电动汽车动力系统设计与测试湖北省重点实验室,湖北襄阳441053

出　　处：《装备制造技术》2021年第10期15-17,24,共4页Equipment Manufacturing Technology

基　　金：湖北省技术创新专项重大项目(2017AAA133);“机电汽车”湖北省优势特色学科群开放基金(XKQ2021003,XKQ2021003,XKQ2021010,XKQ2021011);中央引导地方科技发展财政专项(鄂财政2017[80]号);湖北省自然科学基金青年项目(2020CFB320)。

摘　　要：运动副间隙对机构动态特性影响显著。该文提出了一种上三角肘杆式连杆机械压力机结构,采用环形矢量法建立该机构的运动学方程,并根据各杆件间的几何关联,用多体动力学软件依次独立对多个含间隙铰接点进行了运动学仿真分析得到的结果为:机构多铰接点在同一相对间隙值下对应的运动学动态特性曲线。这表明,在同一相对间隙值下,铰接点间隙趋近执行连杆端时,位移、速度及加速度曲线"畸变"显著增强,各间隙点冲击部位存在的差异性较大。The clearance of the kinematic pair has significant influence on the dynamic characteristics of the mechanism.In this paper,a mechanical press structure with upper triangular elbow-bar linkage is presented.The kinematic equations of the mechanism are established by using the method of circular vector,in this paper,the kinematic simulation of several joints with clearance is carried out by using multi-body dynamics software.The results are as follows:The kinematic dynamic characteristic curves of the joints of the mechanism under the same relative clearance value.The results show that the distortion of Displacement,velocity and acceleration curves is enhanced obviously when the clearance approaches to the end of the connecting rod under the same relative clearance value.

关 键 词：肘杆机构 铰接间隙 运动学 对比分析 

分 类 号：TG385[金属学及工艺—金属压力加工]