检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:曾丽珍[1] 李杰[1] 尹怡辉[2] 赵灏[2] 谢志远 张卫[3] 陈永和[1] 孙堂友 刘兴鹏 李琦[1] 李海鸥[1] ZENG Lizhen;LI Jie;YIN Yihui;ZHAO Hao;XIE Zhiyuan;ZHANG Wei;CHEN Yonghe;SUN Tangyou;LIU Xingpeng;LI Qi;LI Hai’ou(Guangxi Key Lab.of Precision Naviga.Technol.and Applic,Guilin Univ.of Elec.Technol,Guilin,Guangxi 541004,P.R.China;The 34th Research Institute of China Electronics Technology Group Corporation,Guilin,Guangxi 541004,P.R.China;State Key Lab.of ASIC&System,Fudan University,Shanghai 200433,P.R.China)
机构地区:[1]桂林电子科技大学广西精密导航技术与应用重点实验室,广西桂林541004 [2]中国电子科技集团公司第三十四研究所,广西桂林541004 [3]复旦大学专用集成电路与系统国家重点实验室,上海200433
出 处:《微电子学》2021年第6期822-827,共6页Microelectronics
基 金:国家自然科学基金资助项目(61874036,61805053);专用集成电路与系统国家重点实验室开放课题(KVH1233021);广西创新研究团队项目(2018GXNSFGA281004,2018GXNSFBA281152);广西创新驱动发展专项资金项目(桂科AA19254015);广西精密导航技术与应用重点实验室项目(DH202020,DH202001)。
摘 要:基于2μm InGaP/GaAs HBT工艺,设计并实现了一种用于LTE终端的高效率、高线性功率放大器。采用模拟预失真和相位补偿器抑制幅度失真和相位失真,实现了高线性度;利用二次谐波终端电容改变电路工作模式,减少时域电压电流的重叠损耗功率,提高了功率附加效率。结果表明,在3.4 V电源电压、2.8 V偏置电压时,在工作频带815~915 MHz范围内,该功率放大器的增益大于29.5 dB,输入回波损耗小于-13.2 dB;在10 MHz LTE输入调制信号、28 dBm回退输出功率时,功率附加效率为39%~41%,第一相邻信道泄漏比ACLR;小于-38.1 dBc,第二相邻信道泄漏比ACLR_(1)小于-44.8 dBc。Based on a 2μm InGaP/GaAs HBT process,a high efficiency,high linear power amplifier for LTE terminal was designed and implemented.Analog predistortion and phase compensator were used to suppress the amplitude distortion and phase distortion,so as to achieve high linearity.The second harmonic terminal capacitor was used to change the working mode of the circuit,and the overlapping power loss of voltage and current in time domain was reduced,so the additional power efficiency was improved.The results showed that the gain of the power amplifier was greater than 29.5 dB and the input return loss was less than-13.2 dB at 3.4 V power supply and 2.8 V bias voltage within 815~915 MHz frequency range.In the case of 10 MHz LTE input modulation signal and 28 dBm back output power,the power added efficiency was 39%~41%,the ACLR;was less than-38.1 dBc,and the ACLR_(1) was less than-44.8 dBc.
关 键 词:功率放大器 InGaP/GaAs HBT 模拟预失真 相位补偿 功率附加效率
分 类 号:TN43[电子电信—微电子学与固体电子学] TN722.3
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.170