圆角横槽结构对气膜冷却效率影响的实验研究  

Experimental Study on Effects of Structure of Fillet Cross Groove on Film Cooling Efficiency

作　　者：蒋文凯 贺业光 杨天华 张涛 李润东 JIANG Wen-kai;HE Ye-guang;YANG Tian-hua;ZHANG Tao;LI Run-dong(College of Energy and Environment,Shenyang Aerospace University,Shenyang 110136,China;College of Metallurgy,Northeastern University,Shenyang 110136,China)

机构地区：[1]沈阳航空航天大学能源与环境学院,辽宁沈阳110136 [2]东北大学冶金学院,辽宁沈阳110136

出　　处：《推进技术》2021年第12期2772-2779,共8页Journal of Propulsion Technology

基　　金：辽宁省教育厅基础研究项目(JYT2020044)。

摘　　要：为了研究圆角横槽结构对气膜冷却效率的影响,选取槽深、槽宽、圆角半径、吹风比四个影响因素进行正交实验,采用压力敏感漆测试技术对圆孔冷却结构和圆角横槽结构的气膜冷却效率进行测试。结果表明:在低吹风比(BR=0.5)、中吹风比(BR=1)、高吹风比(BR=1.5)下,除Case 3外,圆角横槽的面平均气膜冷却效率均高于单一圆孔。圆角横槽的面平均气膜冷却效率相对于圆孔冷却结构最高可以提高127%,Case 1~9中,优化组合的结构参数为:槽宽2.4D (D为孔径),槽深0.6D,圆角半径0.9D,优化组合面平均气膜冷却效率相对于气膜冷却效率最低的Case 8可以提高177%。在槽宽、圆角半径、槽深、吹风比四个影响因素中,吹风比对圆角横槽气膜冷却效率影响程度最大,其次分别是槽深、槽宽、圆角半径。In order to study the effects of fillet cross groove structure on the film cooling efficiency,the orthogonal experiments were carried out by four factors:groove depth,groove width,fillet radius and blowing ratio.The film cooling efficiency of circular hole cooling structure and fillet cross groove structure was tested by pressure sensitive paint test technology. The results show that under the conditions of low blowing ratio(BR=0.5),medium blowing ratio(BR=1)and high blowing ratio(BR=1.5),except Case 3,the surface average film cooling efficiency of the fillet cross groove is higher than that of the single round hole. The surface average film cooling efficiency of the fillet transverse groove can be increased by 127% compared with the round hole cooling structure,in Case 1~9,the optimized combination of structural parameters is:groove width 2.4 D(D means hole diameter),groove depth 0.6 D,fillet radius 0.9 D,and the optimized combination of surface average film cooling efficiency can be increased by 177% compared with Case 8,which has the lowest film cooling efficiency. Among the four factors of groove width,fillet radius,groove depth and blowing ratio,blowing ratio has the greatest influence on the film cooling efficiency of fillet cross groove,followed by groove depth,groove width and fillet radius.

关 键 词：气膜冷却 圆角横槽 正交实验 压力敏感漆技术 冷却效率 

分 类 号：TK471[动力工程及工程热物理—动力机械及工程]