MEMS惯性测量单元航姿更新中的测量误差估算方法  

Estimation Method of Measurement Errors in MEMS Inertial Measurement Unit Based Orientation Update

作　　者：马江华 林炜轩 万美琳 王德志[2] MA Jianghua;LIN Weixuan;WAN Meilin;WANG Dezhi(School of Electronic Information and Engineering,Wuhan Technical College of Communication,Wuhan 430065,China;Faculty of Physics and Electronic Science,Hubei University,Wuhan 430062,China)

机构地区：[1]武汉交通职业学院电子与信息工程学院,武汉430065 [2]湖北大学物理与电子科学学院,武汉430062

出　　处：《电子与信息学报》2022年第2期775-780,共6页Journal of Electronics & Information Technology

基　　金：国家自然科学基金(61704050)。

摘　　要：利用MEMS惯性测量单元测量载体的航姿,需要借助精密转台且较难精确估算测量误差,导致成本高误差大。针对该问题,该文利用卡尔曼滤波器在线估算载体的姿态和陀螺仪的偏置,提出一种优化航姿精度的测量误差估算方法。通过推导测量误差的数学模型,分析航姿精度随测量误差变化的关系,得到最优航姿时的测量误差值。采用一种MEMS惯性测量单元,测试载体沿任意轨迹匀速运动5 min的航姿。实验结果表明优化后载体的航姿与参考航姿保持一致,且最后静止时段载体的俯仰角、横滚角和航向角仅偏离参考航姿0.008°,0.006°和0.6°。When updating body’s orientation by using Micro Electro-Mechanical System Inertial Measurement Unit(MEMS-IMU),a precision turntable is needed and measurement errors are difficult to be estimated accurately,which cause high cost and large error.Based on the problem,both body’s attitude and gyroscope’s bias are estimated in field by a Kalman filter,an estimation method of measurement errors is proposed for improving orientation’s accuracy.Measurement errors for the optimal orientation’s accuracy are obtained by deducing the measurement errors’mathematical model,and analyzing the relationship between orientation’s accuracy and the variations of measurement errors.By using a MEMS-IMU,the body’s orientation is measured when it keeps movement at a constant speed and in arbitrary trajectory for 5 minutes.Experimental results show the orientation after optimization is consistent with the referenced orientation,and pitch,roll and yaw during the last quiescent period deviate from the reference values only by 0.008°,0.006°and 0.6°respectively.

关 键 词：自主定位 MEMS惯性测量单元 航姿精度 测量误差 

分 类 号：TP212[自动化与计算机技术—检测技术与自动化装置]