机械设计课程设计中基于Inventor和ABAQUS的齿轮有限元分析  

Finite element analysis of gear based on Inventor and ABAQUS in the course design of Mechanical Design Basis

作　　者：孙宇娟 孙国芹[1] 刘小冬[1] 李浩群[1] SUN Yu-juan;SUN Guo-qin;LIU Xiao-dong;LI Hao-qun(Beijing University of Technology,Beijing,100124,China)

机构地区：[1]北京工业大学,北京100124

出　　处：《闽西职业技术学院学报》2022年第1期117-120,共4页Journal of Minxi Vocational and Technical College

基　　金：北京工业大学“本科重点建设课程-优质综合设计类课程(课题编号:048000514120511)”。

摘　　要：在机械设计基础课程设计中,将有限元方法引入设计过程,以Inventor为设计工具,进行二级减速器配对斜齿轮的特征建模,并分别使用Inventor和ABAQUS的有限元分析功能进行配对齿轮的强度校核。结果显示,两种软件计算得到的应力云图分布一致,数值接近。In the course design of Mechanical Design Basis,finite element method is introduced into design process.Using Inventor as the design tool,the feature modeling of the paired helical gear of the second stage reducer was carried out,and the strength of the paired gear was checked by the finite element analysis function of Inventor and ABAQUS respectively.The results show that the stress distribution of cloud images calculated by the two softwares are consistent and the values are close.

关 键 词：机械设计基础 课程设计 有限元 INVENTOR ABAQUS 应力分析 

分 类 号：TH12-42[机械工程—机械设计及理论]