轮胎均匀性检测设备对加载力的控制  

Control of Loading Force of Tire Uniformity Test Equipment

作　　者：胡建光[1] 戴柏炯 姜超浪 HU Jianguang;DAI Bojiong;JIANG Chaolang(Hangzhou Chaoyang Rubber Co.,Ltd,Hangzhou 310018,China;Beijing Langshengfeng Measurement&Control Technology Co.,Ltd,Beijing 102300,China)

机构地区：[1]杭州朝阳橡胶有限公司,浙江杭州310018 [2]北京朗胜峰测控科技有限公司,北京102300

出　　处：《橡胶工业》2022年第4期304-307,共4页China Rubber Industry

摘　　要：均匀性检测设备对轮胎力的加载是通过对负荷轮的位置控制间接实现的,为此运用计算机软件中的二次曲线拟合实时获取轮胎的加载力的计算公式,从而得到标准加载力的负荷轮位置并传给可编程逻辑控制器(PLC),PLC通过步序程序控制负荷轮的动作,并会同伺服控制系统完成负荷轮的精准定位。The loading force to the tire by the uniformity detection equipment was indirectly realized through the position control of the loading wheel. Firstly,the calculation formula of the tire loading force in real time was obtained by quadratic curve fitting using software program,and then the loading wheel position of the standard loading force was acquired and transmitted to the programmable logic controller(PLC) for calibration. Thereafter,the accurate positioning of the loading wheel was achieved through the step program of PLC and servo control system.

关 键 词：轮胎均匀性 检测设备 加载力 负荷轮 位置控制 二次曲线拟合 力学分析 

分 类 号：TQ336.1[化学工程—橡胶工业] TQ330.493