基于XGBoost的糖尿病血液拉曼光谱定量分析法  

Quantitative Analysis of Diabetic Blood Raman Spectroscopy Based on XGBoost

作　　者：王铭萱 王巧云[1] 骈斐斐 单鹏 李志刚[1] 马振鹤 WANG Ming-xuan;WANG Qiao-yun;PIAN Fei-fei;SHAN Peng;LI Zhi-gang;MA Zhen-he(College of Information Science and Engineering,Northeastern University,Shenyang 110819,China)

机构地区：[1]东北大学信息科学与工程学院,辽宁沈阳110819

出　　处：《光谱学与光谱分析》2022年第6期1721-1727,共7页Spectroscopy and Spectral Analysis

基　　金：国家自然科学基金项目(11404054,61601104);河北省自然科学基金项目(F2019501025,F2020501040,F2017501052);中央高校基本科研业务费专项资金项目(N172304032,2020GFYD026)资助。

摘　　要：血液中包含着大量的生物信息,如激素、酶、血糖等成分,而血糖偏高将引发糖尿病。糖尿病有很多并发症,比如脑梗塞,脑出血,肾脏损害,眼底损害,周围神经病变等一系列疾病。目前,血液常规成分检测分析周期较长,结果反馈较慢,难以实现快速连续检测。光学检测技术能够根据待测物质的光谱鉴别物质化学成分和相对含量,因其灵敏度高、适用性强、分析速度快等优势,在血液无创检测领域逐渐发挥其优势。随着激光技术的不断进步,拉曼光谱技术作为一种非线性散射光谱技术,在血液检测技术中得到了广泛应用。为提高拉曼光谱的预测精度,首次将XGBoost算法应用到拉曼光谱血液血糖浓度中进行预测精度的提升。实验中106组血液样本及试验标准值为河北省秦皇岛市第一医院提供,选用布鲁克的MultiRAM光谱仪进行血液的拉曼光谱数据测量,实验中1064 nm激发光源功率为400 mW,光谱分辨率为6 cm^(-1),扫描速率为10 kHz,扫描范围为400~4000 cm^(-1),对每个样本重复采集10次并计算平均值作为原始光谱数据,以保证实验的准确性和可重复性。该方法无需对数据进行预处理,首先将光谱数据随机划分为训练集和测试集,比例为7∶3,训练集用于训练模型并确定模型参数,测试集用于测试模型的稳定性和预测精度。建立XGBoost模型后,用网格搜索法和k折交叉验证优化模型参数;引入模型评估指标和克拉克网格误差分析图对XGBoost模型血糖浓度的预测进行分析;最后将XGBoost模型与决策树(DT)、随机森林(RF)和支持向量机回归(SVR)模型进行对比。实验结果表明通过XGBoost建立的定量回归模型效果最佳,模型的决定系数为0.99999,校正集均方误差为0.00749,预测集均方误差为0.00717,相对分析误差为331.97318,预测点均落在克拉克网格误差分析图的A区。结果证明,将XGBoost算法应用到拉曼光谱血液成分定�The blood contains many biological information,such as hormones,enzymes,blood sugar and other components.High blood sugar will cause diabetes,which has many complications,such as cerebral infarction,cerebral hemorrhage,kidney damage,fundus damage,peripheral neuropathy and a series of diseases.At present,the routine blood component detection and analysis cycle are too long,the resulting feedback is slow,and it is not easy to achieve rapid and continuous detection.Optical detection technology can identify the chemical composition and relative content of the substance according to the spectrum of the substance to be tested.Because of its advantages,such as high sensitivity,strong applicability,and fast analysis speed,it gradually exerts its advantages in blood non-invasive detection.With the continuous advancement of laser technology,Raman spectroscopy technology,as a nonlinear scattering spectroscopy technology,has been widely used in blood detection technology.In order to improve the prediction accuracy of Raman spectroscopy in this paper,the XGBoost algorithm was firstly applied to the blood glucose concentration of Raman spectroscopy to improve the prediction accuracy.106 sets of experimental blood samples and real concentrations were provided by the First Hospital of Qinhuangdao City,Hebei Province.Bruker’s Multi RAM spectrometer was used to measure blood Raman spectroscopy data.In the experiment,the power of the 1064 nm excitation light source was 400 mW,the spectral resolution was 6 cm^(-1),the scanning rate was 10 kHz,and the scanning range was 400~4000 cm^(-1).Each sample is collected 10 times,and the average value is calculated as the original spectrum to ensure the accuracy and repeatability of the experiment.In this paper,the method does not require preprocessing of the data.Firstly,the spectral data were randomly divided into a training and test sets with a ratio of 7∶3.The training set was used to train the model and determine the model parameters.The test set was used to verify the stability and p

关 键 词：XGBoost 拉曼光谱 血糖 定量回归 

分 类 号：O433.4[机械工程—光学工程]