上三角肘杆式压力机构间隙动力学特性分析  

Analysis on dynamic characteristics of upper triangular toggle press mechanism clearance

作　　者：钱伟 吴钊[1] 吴华伟[1,2] 张运军 王乙坤 李正 Qian Wei;Wu Zhao;Wu Huawei;Zhang Yunjun;Wang Yikun;Li Zheng(Hubei Key Laboratory of Electric Vehicle Powertrain Design and Test,Hubei University of Arts and Science,Xiangyang 441053,China;School of Automotive and Traffic Engineering,Hubei University of Arts and Sciences,Xiangyang 441053,China;Hubei Tri-Ring Forging Co.,Ltd.,Xiangyang 441700,China)

机构地区：[1]湖北文理学院纯电动汽车动力系统设计与测试湖北省重点实验室,湖北襄阳441053 [2]湖北文理学院汽车与交通工程学院,湖北襄阳441053 [3]湖北三环锻造有限公司,湖北襄阳441700

出　　处：《锻压技术》2022年第6期214-223,共10页Forging & Stamping Technology

基　　金：湖北省技术创新专项重大项目(2017AAA133);新能源汽车与智慧交通湖北省高等学校优势特色学科群(XKQ2022002,XKQ2022003);湖北省自然科学基金青年项目(2020CFB320)。

摘　　要：压力机械的运动副常因受到反冲作用力而产生运动间隙,导致机械系统的冲击增大,冲压成形稳定性降低。优选三角肘杆式压力机构运动副间隙动力学的建模及仿真,依据其工作原理分析了上三角型与下三角型肘杆式压力机构执行连杆的运动特性变化规律,得出上三角型相对下三角型在位移、速度和加速度方面分别优化了30%、59%和390%;基于MLSD运动副间隙模型,运用ADMAS虚拟样机技术建立了含运动副间隙上三角型肘杆式压力机构的动力学仿真模型,分析了运动副间隙引起的碰撞和磨损对机构动态特性的影响。结果表明,运动副相对间隙值超20%时,机构运行将伴随较大的冲击,并伴随一定程度的振动和噪声,影响机构工作的稳定性。研究结果为肘杆式压力机构的结构设计提供了理论依据。The moving pair of pressure machine is often prone to produce movement gaps due to the recoil force, which leads to the increase of impact for mechanical system and the decrease of stability for stamping forming. Therefore, the dynamic modeling and simulation of moving pair clearance for triangular toggle press mechanism were optimized. Based on its working principle, the variation rules of motion characteristics for the executive connecting rod of upper triangle type and lower triangle type toggle press mechanisms were analyzed, and the displacement, velocity and acceleration of the upper triangle type were optimized by 30%, 59% and 390%, respectively, compared with the lower triangle type. Then, based on moving pair clearance model MLSD, a dynamic simulation model of upper triangular type toggle press mechanism with moving pair clearance was established by virtual prototype technology ADMAS, and the influences of collision and wear caused by moving pair clearance on dynamic characteristics of the mechanism were analyzed. The results show that when the relative clearance value of moving pair exceeds 20%, the operation of the mechanism is accompanied by great impact, as well as vibration and noise to a certain extent, which affects the stability of the mechanism. Thus, the research results provide theoretical basis for the structural design of toggle press press mechanism.

关 键 词：肘杆式压力机构 运动副间隙 动力学特性 运动学特性 执行连杆 

分 类 号：TG385[金属学及工艺—金属压力加工]