轴对称巡航导弹打击动态目标的多维泰勒网优化控制  

Multi-dimensional Taylor Network Optimal Control of Axisymmetric Cruise Missile Flight for Attacking Moving Target

作　　者：葛永彦 王庆祥 秦国栋[1] 谢春云 

机构地区：[1]嘉兴职业技术学院智能制造学院,浙江嘉兴314001 [2]嘉兴佳利电子有限公司,浙江嘉兴314001

出　　处：《工业控制计算机》2022年第7期77-79,共3页Industrial Control Computer

摘　　要：提出了无风状态下轴对称巡航导弹打击动态目标的多维泰勒网(MTN)优化控制方案。首先,建立轴对称巡航导弹非线性、全耦合的六自由度模型及机动目标模型,然后分析并设计PID控制器、MTN控制器、滑模控制器,最后搭建MATLAB仿真平台,对模型进行仿真试验,对比无风状态下以上三种控制器对导弹的控制效果。结果表明,相同条件下,MTN控制器的控制效果较好。In this paper,the design method of the guidance control system of the attacking moving target of the axisymmetric cruise missile is proposed based on the multi-dimension Taylor network optimal control.First of all,a nonlinear and fully coupled six degrees of freedom equations of motion based on the forces and moments of the axisymmetric cruise missile and moving target model are established.Then the PID optimization controller,the multi-dimensional Taylor network optimization controller and the integral sliding mode controller are adopted.Finally,the MATLAB simulation platform is built and the model is simulated to compare the control effects of the above three controllers on the missile in a windless state.The results show that the control effect of MTN optimal controller is better under the same conditions.

关 键 词：动态目标 巡航导弹 MTN优化控制 MATLAB仿真 

分 类 号：TP273[自动化与计算机技术—检测技术与自动化装置] TJ761.6[自动化与计算机技术—控制科学与工程]