高校实验教学用数控电解加工设备研制  

Design of NC Electrochemical Machining Equipment for Experimental Teaching in Colleges and Universities

作　　者：徐波[1] 李庆铁 赵彻 周叙荣[1] 徐红丽[1] 吴振彤 XU Bo;LI Qingtie;ZHAO Che;ZHOU Xurong;XU Hongli;WU Zhentong(Jiangsu Key Laboratory of Special Processing,Changzhou Institute of Technology,Changzhou,Jiangsu Province,213002 China;Shanghai Lanchang Technology Group Co.,Ltd.,Shanghai,200072 China;Changzhou Mokai Precision Machinery Co.,Ltd.,Changzhou,Jiangsu Province,213000 China)

机构地区：[1]江苏省高校特种加工重点实验室常州工学院,江苏常州213002 [2]上海蓝长科技集团有限公司,上海200072 [3]常州莫凯精工机械有限公司,江苏常州213000

出　　处：《科技创新导报》2022年第7期14-18,共5页Science and Technology Innovation Herald

基　　金：江苏省高等学校基础科学(自然科学)面上项目(项目名称:高空间利用率仿生执行器及其缠绕夹持功能研究,项目编号:21KJB460003);产教融合课程建设(项目编号:30120300000-CJKC-001)。

摘　　要：为研制一台功能齐全的实验室用电解加工设备,采用全面、综合的概念设计开发了数控电解加工机床本体、电解加工电源和电解液供给系统,并采用控制系统将其有机联系在一起。其中,电解加工机床床身采用矿物质浇筑法,控制系统采用开放式数控系统,并带有不锈钢防护罩和工作台面;电解加工电源能实现低电压、高电流特性,并拥有短路保护功能;电解液供给系统的电导率、pH值、温度等参数可调,过滤达微米级。通过单个叶片的电解加工试验,表明该机床功能完善,满足高校实验室使用要求。In order to develop a fully functional electrochemical machining equipment for laboratory,the NC ECM machine body,ECM power supply and electrolyte supply system are designed and developed by adopting a comprehensive and comprehensive concept,and the control system is used to organically link them together.Among them,the ECM machine bed adopts mineral pouring method,the control system adopts open CNC system and is equipped with stainless steel protective cover and worktable.The ECM power supply can realize the charac‐teristics of low voltage and high current,and has the function of short circuit protection.The conductivity,pH value,temperature and other parameters of the electrolyte supply system can be adjusted,and the filtration can reach the micron level.The electrochemical machining test of a single blade shows that the machine tool has perfect functions and meets the requirements of university laboratories.

关 键 词：实验教学 电解加工 设备研制 试验研究 

分 类 号：TG662[金属学及工艺—金属切削加工及机床]