基于超快冷工艺的Q355B钢板性能均匀性  

Uniformity of performance of Q355B steel plate based on the ultra-fast cooling process

作　　者：潘刚 俞俊 杨阳 肖娟 甘雯雯 PAN Gang;YU Jun;YANG Yang;XIAO Juan;GAN Wenwen(Guangxi Liuzhou Iron and Steel Group Co.,Ltd.,Liuzhou 545002,China)

机构地区：[1]广西柳州钢铁集团有限公司,柳州545002

出　　处：《理化检验（物理分册）》2022年第7期10-12,17,共4页Physical Testing and Chemical Analysis(Part A:Physical Testing)

摘　　要：采用对钢板纵向和横向不同位置进行力学性能测试和金相检验的方法,分析了超快冷工艺下低合金Q355B钢板的性能均匀性,验证了工艺的可靠性。结果表明:钢板头部的强度和韧性略高,但钢板的屈服强度同板差≤40 MPa,抗拉强度同板差≤19 MPa,断后伸长率同板差≤4.0%,冲击韧性同板差≤35 J,钢板具有较好的性能均匀性;钢板上、下表面的显微组织存在差异性,说明上、下表面冷却能力不同,需要增加下集管流量以对下表面换热能力进行补偿,使厚度方向冷却均匀。The performance uniformity of low alloy Q355 B steel plate under ultra-fast cooling process was analyzed and the reliability of the process was verified by mechanical properties test and metallographic examination at different positions of longitudinal and transverse. The results show that the strength and toughness of the steel plate head were slightly higher, but the yield strength, tensile strength, elongation and impact toughness of the steel plate were ≤40 MPa, ≤19 MPa, ≤4.0% and ≤35 J, respectively, the steel plate had good performance uniformity. There were differences in the microstructure of the upper and lower surfaces of the steel plate, indicating that the cooling capacities of the upper and lower surfaceswere different, it was necessary to increase the flow rate of the lower header to compensate the heat transfer capacity of the lower surface, so that the cooling in the thickness direction was uniform.

关 键 词：超快速冷却 Q355B钢 力学性能 均匀性 显微组织 

分 类 号：TG131[一般工业技术—材料科学与工程]