检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:刘晓冬 蔡为民[1] 张沛良 王永恩 黄勇[2] 高立华[2] LIU Xiaodong;CAI Weimin;ZHANG Peiliang;WANG Yongen;HUANG Yong;GAO Lihua(Shenyang Aircraft Design and Research Institue,Shenyang 110035,China;China Aerodynamics Research and Development Center,Mianyang 621000,Chinaçö)
机构地区:[1]沈阳飞机设计研究所,辽宁沈阳110035 [2]中国空气动力研究与发展中心,四川绵阳621000
出 处:《西北工业大学学报》2022年第4期845-852,共8页Journal of Northwestern Polytechnical University
摘 要:采用流动控制技术产生类似机械舵面的控制能力是近些年的研究热点。以飞翼布局为研究对象,从二维翼型到三维机翼,通过CFD计算和低速风洞试验,开展了基于柯恩达效应的机翼后缘喷气环量控制研究,给出了参数影响规律和控制效果。结果表明:机翼后缘布置柯恩达型面和对应喷口,通过上表面喷口吹气产生类似机械舵面正偏的控制能力,下表面喷口吹气产生类似机械舵面负偏的控制能力;随着喷口的高度减小,环量控制能力逐渐增大;随喷气压比增加,环量控制能力先增大后减小;圆形的柯恩达型面相比椭圆形控制效果更佳;优化环量方案在Ma=0.2时产生的操纵能力不低于机械舵面,对应流量需求在0.05~0.07 kg/s左右。In recent years,it has been a hot spot to use flow control technology to generate control capability similar to mechanical rudder.Taking the flying wing configuration as the research object,based on CFD and low speed wind tunnel test,the circulation control of airfoil and wing based on Coanda effect is studied,and the parameter influence law and control effect are given.The results show that:when the rear edge of the wing is opened with the corresponding slot,the control capability of the upper⁃surface blowing is similar to that of the mechanical rudder;the control capacity of pitch and roll is increased with the decreasing of jet height and the increasing of air pressure ratio,the pitching and rolling capacity increases first and then decreases;the control effect of circular Coanda sur⁃face is better than elliptical Coanda surface;the pitching and rolling control effect of the optimized circulation⁃con⁃trol scheme in Ma=0.2 is not lower than that of the mechanical rudder,the corresponding flow flux is about 0.05~0.07 kg/s.
关 键 词:柯恩达效应 飞翼布局 环量控制 CFD 风洞试验
分 类 号:V211.3[航空宇航科学与技术—航空宇航推进理论与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.30