检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:罗丽梅 Luo Limei(Technical Center of Fujian Sansteel Group Co.,Ltd.,Sanming Fujian 365000)
机构地区:[1]福建三钢集团有限责任公司技术中心,福建三明365000
出 处:《山西冶金》2022年第5期15-17,共3页Shanxi Metallurgy
摘 要:针对45钢厚板火切后端部开裂现象,通过对送检的开裂试样进行一系列的分析检测,得出了45钢厚板端部开裂的裂纹为应力裂纹,主要是由试样组织晶粒粗大引起的板材塑性差导致的,且火切质量不佳(火切面不平整)也是裂纹产生的主要诱因,同时通过试验明确了组织晶粒粗大的原因,并针对性地提出改进措施。In view of the cracking phenomenon of the rear end of flame cutting of 45 steel plate, through a series of analysis and detection of the cracked samples submitted for inspection, it is found that the crack at the end of 45 steel steel plate is a stress crack, which is mainly caused by the poor plasticity of the plate caused by the coarse grain of the sample structure, and the poor quality of flame cutting(uneven flame cutting surface) is also the main inducement of the crack. The reason of coarse grain size is found out and the improvement measures are put forward.
分 类 号:TG115[金属学及工艺—物理冶金]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.63