三维表面应变测量方法在3DN C/SiC扭转性能测试的应用  

Application of 3D Surface Strain Measurement Method in 3DN C/SiC Torsion Performance Test

作　　者：李旭勤 周纯 张凤春[1] 熊倩 龚粤梅 陈想 李斌 吴一帆 LI Xuqin;ZHOU Chun;ZHANG Fengchun;XIONG Qian;GONG Yuemei;CHEN Xiang;LI Bin;WU Yifan(School of Materials and Environmental Engineering,Chengdu Technological University,Chengdu 611730,China;The Sixth Military Representative Office of the Rocket Force Equipment Department in Xi an,Xi an 710072,China)

机构地区：[1]成都工业学院材料与环境工程学院,成都611730 [2]火箭军装备部驻西安地区第六军事代表室,西安710072

出　　处：《成都工业学院学报》2022年第3期1-5,26,共6页Journal of Chengdu Technological University

基　　金：成都工业学院博士基金(2019RC005)。

摘　　要：通过3DN C/SiC复合材料的开孔试样进行扭转试验的数字图像相关技术分析,研究损伤与应变的关系及最大应变处。在实验中利用MTS拉扭疲劳试验机对试样施加不同比例的扭转载荷,研究材料在耦合应力状态下的力学行为与失效机制。通过对材料的断口分析,探究材料在扭转性能测试过程中内部结构的变化。结果表明扭转载荷作用下,材料的应变并不均匀,随着损伤的不断累积,最大应变位置处先发生断裂。The DIC analysis of the torsion test was carried out on the open-hole specimen of the 3DN C/SiC composite material to study the relationship between the damage and the strain and the location of maximum strain.In the experiment,the MTS tensile and torsion fatigue testing machine was used to apply different proportions of torsional load to the specimen to study the mechanical behavior and failure mechanism of the material under the coupled stress state.Through the fracture analysis of the material,the change of the internal structure of the material during the torsional performance test was explored.The results show that under the torsional load,the strain of the material is not uniform.With the damage continues to accumulate,fracture occurs first at the position of maximum strain.

关 键 词：3DN C/SiC复合材料 数字图像相关技术 扭转性能 断裂位置 

分 类 号：TB333[一般工业技术—材料科学与工程]