检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:郭靖 齐峰 徐延勤 李楠 张心月 GUO Jing;QI Feng;XU Yan-qin;LI-Nan;ZHANG Xin-yue(Research Institute of Liaoyang Petrochemical Company,Liao yang 111003,China;Production Monitoring Department of Liaoyang Petrochemical Company,Liao yang 111003,China)
机构地区:[1]辽阳石化公司研究院,辽宁辽阳111003 [2]辽阳石化公司生产监测部,辽宁辽阳111003
出 处:《聚酯工业》2022年第6期9-12,共4页Polyester Industry
摘 要:提出了一种非离子表面活性剂吐温80胶束增敏可见分光光度法测定共聚酯PETG中钛离子含量的方法。马弗炉中550℃将共聚酯PETG切片样品进行灰化处理后,用焦硫酸钾在625±25℃的马弗炉中熔融灰分20 min,冷却后以10%H_(2)SO_(4)溶液溶解,在盐酸介质中,以抗坏血酸做掩蔽剂,钛-二安替比林甲烷(DAM)-吐温80生成黄色可溶性络合物,最大吸收波长390 nm处,钛离子质量浓度在(0.2~1.0)mg/L范围内与吸光度值呈良好的线性关系,相关系数为0.9996,吸光系数吸光系数ε_(390)达1.05×105L/(mol·cm),样品分析结果准确度高,方法灵敏。A non-ionic surfactant Tween 80 micellar sensitized visible spectrophotometric method for the determination of titanium ion in copolyester PETG was proposed.After the copolyester PETG chip sample is ashed at 550℃in the muffle furnace,the ash is melted with potassium pyrosulfate in the muffle furnace at 625±25℃for 20min.After cooling,it is dissolved in 10% H_(2)SO_(4) solution.In hydrochloric acid medium,ascorbic acid is used as masking agent,Ti Diantipyrylmethane(DAM)-tween 80 forms a yellow soluble complex,and the maximum absorption wavelength is 390nm,The mass concentration of titanium ion has a good linear relationship with the absorbance value in the range of 0.2~1.0 mg/L,the correlation coefficient is 0.9996,and the molar absorbance coefficient is molar absorbance coefficient ε_(390) up to 1.05×105L/(mol·cm),high accuracy of sample analysis results and sensitive method.
关 键 词:PETG 钛离子 吐温80 二安替比林甲烷 可见分光光度法
分 类 号:TQ323.41[化学工程—合成树脂塑料工业]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.7