利用“双模法”回收及再生PCB酸性蚀刻废液的工业实践  

Industrial Practice of Recycling and Regenerating PCB Acid Etching Waste Liquid Using“Dual-Mode Method”

作　　者：朱振华 沈天晓 Zhu Zhen-hua;Shen Tian-xiao(Kanfort(Jiangmen)Environmental Technology Co.,Ltd.,Jiangmen 529000,Guangdong Province,China)

机构地区：[1]励福(江门)环保科技股份有限公司,广东江门529000

出　　处：《科学与信息化》2022年第23期135-139,共5页Technology and Information

摘　　要：本文介绍了“双模法”回收及再生酸性蚀刻废液的原理及工艺流程,对“双模法”进行了工业化试验,回收得到铜含量99.9%以上的阴极铜及铜含量65%以上的海绵铜粉,铜的回收率99%以上,从某PCB厂蚀刻制程产生的酸性蚀刻废液,利用“双模法”处理,其中的70%用膜电解法处理,30%用还原法处理,处理后的再生液蚀刻指标达到企业要求。This paper introduces the principle and process flow of“dual-mode method”in the recycling and regeneration of acid etching waste liquid,and conducts industrial tests on the“dual-mode method”.The sponge copper powder at cathode copper content of more than 99.9%and copper content of more than 65%is obtained,and the recovery rate of copper is more than 99%.For the acid etching waste liquid generated by the etching process of a PCB factory,it is treated by using the“dualmode method”,of which 70%is treated by film electrolysis method,30%is treated by reduction method,and the regeneration liquid etching index after treatment meets the requirements of enterprises.

关 键 词：PCB酸性蚀刻废液 回收 再生 双模法 膜电解法 还原法 

分 类 号：TN4[电子电信—微电子学与固体电子学]