民用建筑电气数字照明节能控制方法  

Energy Saving Control Method of Electrical Digital Lighting in Civil Building

作　　者：李苗 LI Miao(China Energy Engineering Group Guangdong Electric Power Design and Research Institute Co.,Ltd.,Guangzhou 510000,Guangdong,China)

机构地区：[1]中国能源建设集团广东省电力设计研究院有限公司,广东广州510000

出　　处：《电气传动自动化》2023年第1期35-38,共4页Electric Drive Automation

摘　　要：由于传统的电气照明节能控制效果较差、能耗较高,为此,本文提出了一种民用建筑电气数字照明节能控制方法。该方法利用亮度检测器和红外传感器采集和调控照明亮度数据,然后通过总线通信方式将这些数据传输到计算机上,并根据当地的日出和日落的时间等情况,对照明开启和关闭的时间进行自适应调整。在上述的照明时间内,根据照明亮度的需求,采用PID控制算法对照明亮度参数进行优化控制。实验结果表明,本文的节能控制方法应用后民用建筑照明的用电量减少,其具有较好的节能效果。Since the traditional electric lighting energy-saving control effect is poor and the energy consumption is high,this paper proposes a civil building electric digital lighting energy-saving control method.The method uses the brightness detector and infrared sensor to collect and control the lighting brightness data,and then transmits these data to the computer through bus communication,and adaptively adjusts the lighting on and off time according to the local sunrise and sunset time.In the above lighting time,according to the demand of lighting brightness,the PID control algorithm is used to optimize the lighting brightness parameters.The experimental results show that the power consumption of civil building lighting is reduced after the application of the energy-saving control method in this paper,which has a good energy-saving effect.

关 键 词：民用建筑 数字照明 节能控制 亮度检测器 PID控制算法 

分 类 号：TM923[电气工程—电力电子与电力传动] TP272[自动化与计算机技术—检测技术与自动化装置]