检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:刘仁伟 岳林[1] LIU Renwei;YUE Lin(College of Mechanical Electrical Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing,210016,China)
出 处:《振动.测试与诊断》2023年第1期188-193,205,共7页Journal of Vibration,Measurement & Diagnosis
基 金:国家重点研发计划资助项目(2016YFF0203304)。
摘 要:转子系统在故障状态下的振动信号往往呈现很强的非线性,其在频域上主要表现为不同频率之间相互耦合,产生合频、差频等组合频率。为了解决传统频谱分析只关注信号中的频率成分及其幅值大小,而忽略信号相位信息的问题,采用双谱方法对振动信号进行分析。双谱包含信号相位信息并且对非线性敏感,可以将早期故障的微弱非线性放大,检测出频谱中不同频率之间的非线性相位耦合关系。通过对ZT-3转子实验台植入不同类型的故障,采集系统在不同状态下的加速度信号,从振动信号的双谱中提取各频段的信息熵,采用模糊聚类方法进行故障识别。结果表明,双谱熵作为特征参量可以准确识别转子系统的故障类型,验证了方法的可行性。Vibration signal of rotor system in fault state tends to be highly non-linear, which is mainly manifested in the frequency domain as coupling between different frequencies, generating combined frequency, differential frequency and other combined frequencies. In order to solve the problem that traditional spectrum analysis only focuses on the frequency component and its magnitude of the signal, but ignores the phase information of the signal. Bispectrum contains signal phase information and is sensitive to nonlinearity. It can amplify weak nonlinearity of early faults and detect nonlinear phase coupling between different frequencies in the spectrum. By implanting different types of faults into ZT-3 rotor test-bed, the acceleration signals of the system in different states are collected, the information entropy of each frequency band is extracted from the bispectrum of vibration signals, and the fuzzy clustering method is used for fault identification. The result shows that the bispectrum entropy as a characteristic parameter can accurately identify the fault type of the rotor system, which verifies the feasibility of the method.
分 类 号:TH133[机械工程—机械制造及自动化] TH17
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.15