远洋渔业多波束声呐主机高效散热设计与验证  

Design and verification of the efficient heat dissipation of the multi-bea fishing sonar host for ocean operation

作　　者：孙崇洋 李国栋 杨育红 隋江华 SUN Chongyang;LI Guodong;YANG Yuhong;SUI Jianghua(School of Navigation and Naval Architecture,Dalian Ocean University,Dalian 116023,China;Fishery Machinery and Instrument Research Institute,Chinese Academy of Fishery Science,Shanghai 200092,China)

机构地区：[1]大连海洋大学航海与船舶工程学院,大连116023 [2]中国水产科学研究院渔业机械仪器研究所,上海200092

出　　处：《农业工程学报》2023年第1期60-69,共10页Transactions of the Chinese Society of Agricultural Engineering

基　　金：国家自然科学基金项目(32073026);交通运输部海事局项目(2018150规(6)号);辽宁省教育厅2021年度科学研究经费项目(面上项目)(LJKZ0726)。

摘　　要：为了解决多波束渔用声呐主机在远洋渔船高温、高湿环境下工作时面临的散热问题,该研究从多波束渔用声呐主机的散热分析出发,运用传热学和结构设计的相关理论,对渔用声呐主机进行了热设计。首先运用系统分析法对声呐主机整个散热过程中的结构和散热方式展开研究;然后,利用热仿真软件对声呐主机的散热过程进行仿真,对比信号处理机在不同风道设计方案下声呐主机的整机温度的变化,多款散热风扇对整机散热效果的影响,在不同环境温度下(20、30、40、50℃)声呐主机的散热能力,以及热设计前后的温度分布;最后,搭建了声呐主机散热测试平台,验证声呐主机的真实散热能力。结果表明,强迫对流与自然冷却结合的散热方式可以解决声呐主机的热量堆积问题。仿真结果表明,4条风道的设计可作为声呐主机的散热方案,选用的FFB0612SHE和FFB0612EHE散热风扇符合声呐主机的散热要求,通过热设计可使声呐主机的温升控制在25℃以内,热量堆积现象大幅改善。散热试验结果表明,热设计后的渔用声呐主机散热能力大幅提升,声呐主机的温升控制在25℃以内,各板卡之间的温度控制在5℃以内,验证了仿真分析结果,在热源与主机外部环境之间形成了一条低热阻的通道。研究结果提高了声呐主机的工作稳定性,为声呐主机在远洋渔船高温、高湿环境下的正常工作提供了解决方案和理论分析方法。An active sonar system of a fish finder can transmit the ultrasonic waves into the water below,and receive the returning echoes from the objects underwater in the fishing industry.The conventional fish finder can search only vertically underneath the own ship.By contrast,the multi-beam fishing sonar is the typical device to search both horizontally and vertically underwater using sound waves in the pelagic fish finder.The underwater transducer can be used to transmit and receive acoustic signals underwater.Among them,the multi-beam fishing sonar host is the core hardware of the fishing sonar system,due mainly to its high technical performance,integration,stability,and reliability.Furthermore,the detection of marine organisms can depend directly on the thermal design,one of the key technologies of sonar hosts in the whole system.In this study,a series of designs and verification was carried out for the efficient heat dissipation of multi-beam fishing sonar hosts for ocean operation.The heat dissipation analysis of the sonar host for fishing was also implemented to realize the thermal design of the sonar host for fishing,according to the relevant theories of heat transfer and structural design.Firstly,the heat dissipation mode was determined to fully meet the industrial requirements of the airtight performance of the sonar host,according to the structure design of the sonar host and various heat dissipation.Specifically,natural cooling was used for the shell of the host and the external environment,whereas,forced air cooling was adopted for the interior of the host.A systematic analysis was then made to determine the structure of the sonar host for fishing.The heat dissipation was also analyzed during the entire process from the heat source to the board,the chassis,and the external environment.As such,some suggestions were proposed in the whole process of design and manufacture.Secondly,the thermal simulation software was used to simulate the heat dissipation process of the sonar host.Four schemes were compared to

关 键 词：热 设计 仿真 声呐 多波束 渔用 远洋探鱼仪 

分 类 号：S972.61[农业科学—捕捞与储运] U666.72[农业科学—水产科学]