大尺寸铝轮毂多浇道铸造工艺的数值模拟  

Numerical Simulation of the Multi-runner Casting Process for Large Size Aluminum Hub

作　　者：周振 卢德宏[1] 逯东辉 李贞明 ZHOU Zhen;LU Dehong;LU Donghui;LI Zhenming(School of Materials Science and Engineering,Kunming University of Science and Technology,Kunming 650093,China;Yunnan Fuyuan Jinfei Wheel Manufacturing Co.,Ltd.,Qujing 655000,China)

机构地区：[1]昆明理工大学材料与科学工程学院,云南昆明650093 [2]云南富源今飞轮毂制造有限公司,云南曲靖655000

出　　处：《铸造技术》2023年第3期286-292,共7页Foundry Technology

基　　金：云南省重大科技专项(202102AB080015)。

摘　　要：以实际低压铸造生产的A356铝合金大尺寸轮毂铸件为对象,对单浇道、双浇道和三浇道3种浇注工艺方案进行了充型和凝固模拟。根据模拟结果,分别对比了3个工艺方案的缺陷分布情况、充型效率、晶粒半径大小以及卷气情况。结果表明,三浇道工艺不仅提高了轮毂质量,减少了缺陷,而且大大缩短了生产时间,是有潜力的新工艺。The filling and solidification of large-size A356 aluminum alloy hub castings produced by low pressure casting were simulated for three pouring process schemes,namely,single runner,double runner and triple runner.According to the simulation results,the defect distribution,filling efficiency,grain radius and entrainment of the three process schemes are compared.The results show that the triple runner process not only improves the quality of the hub and reduces the defects,but also greatly shortens the production time,which is a potential new process.

关 键 词：低压铸造 铝合金轮毂 工艺优化 多浇道 

分 类 号：TG249.2[金属学及工艺—铸造]