316L不锈钢卷镀铜挂具设计对镀层厚度均匀性的影响  

Effects of Hanger Design on Thickness Homogeneity of Winding-Plating Copper Layer on 316L Strip

作　　者：刘晓东 朱晴晴 方倩雯 何康 李宵宵 王振卫 LIU Xiaodong;ZHU Qingqing;FANG Qianwen;HE Kang;LI Xiaoxiao;WANG Zhenwei(School of Chemical and Environmental Engineering,Shanghai Institute of Technology,Shanghai 201418,China)

机构地区：[1]上海应用技术大学化学与环境工程学院,上海201418

出　　处：《电镀与精饰》2023年第4期51-56,共6页Plating & Finishing

摘　　要：受制于短带材的长度特点及其对镀层均匀性的要求,没有合适形状的挂具。本文通过设计一种圆柱体形挂具,将挂具与带材接触的部分凹陷,用其固定内侧阳极来控制阳极板与带材的相对位置,依靠带材侧面与挂具的两个接触点导电;还对挂具进行了绝缘处理、采用辅助阴极使电流分布更均匀。结果表明,改进挂具的凹陷设计、采用辅助阴极改善了镀层厚度分布的均匀度,镀层厚度分布的标准差由1.8μm变为0.4μm,实现了不锈钢短带材卷绕后的均匀电镀。There is no hanger with suitable shape for the thin characteristics of short strip in order to meet the requirements of thickness uniformity of the coating.In this paper,a cylindrical hanger is designed,whose part of contacting with the strip recessed,and the inner anode is fixed with it to determine the relative position of the anode plate and the strip.It can electrify by the two contact points between the side of the strip and the hanger;in order to make the current distribution more uniform,the hanger was insulated and auxiliary cathode was used.The treatments are helpful in homogeneity of the coating thickness distribution.The standard deviation of the coating thickness distribution is decreased from 1.8μm to 0.4μm,which means the short 316L strip was plated uniformly.

关 键 词：316L不锈钢 挂具 卷镀 镀铜 厚度 均匀度 

分 类 号：TQ153[化学工程—电化学工业]