红酒运输中包装的缓冲减振隔衬性能分析  

Performance analysis of buffer and vibration isolation lining for red wine transport packaging

作　　者：王成位 顾文娟[1] 刘美红[1] 李书浩 WANG Cheng-wei;GU Wen-juan;LIU Mei-hong;LI Shu-hao(Faculty of Mechanical and Electrical Engineering,Kunming University of Science and Technology,Kunming,Yunan 650500,China)

机构地区：[1]昆明理工大学机电工程学院,云南昆明650500

出　　处：《食品与机械》2023年第4期110-116,177,共8页Food and Machinery

摘　　要：目的:将有限元仿真结合到随机振动试验中,为红酒运输包装研究提供新思路。方法:以3种不同缓冲减振材料制成的红酒内包装隔衬作为研究对象,通过随机振动试验研究其振动响应,并采用有限元仿真模拟分析试验与仿真结果的关联性。结果:随机振动试验结果与有限元仿真结果高度一致,且有限元仿真较随机试验节省物料、节约时间。结论:通过随机试验与有限元相结合的方法可提高试验效率,有限元仿真方法可为运输振动环境下产品内包装件的分析与设计提供有效指导。Objective:In this study,the finite element simulation was integrated into random vibration experiment to provide a new way of thinking about transportation packaging.Methods:The red wine inner packaging spacer,made of three different cushioning materials,was used as the research object,and the vibration response was studied through random vibration experiment.Then the finite element simulation was used to analyze the correlation between the experiment and the simulation results.Results:The results of random vibration test were highly consistent with the results of finite element simulation,and the finite element simulation was less material-and time-consuming,compared with the random test.Conclusion:The combination of random experiment and finite element method can improve the efficiency of the experiment.The finite element simulation method can provide effective guidance for the analysis and design of product inner packaging under the vibration environment of transportation.

关 键 词：红酒 运输 随机振动 内包装 有限元仿真 

分 类 号：TS261.48[轻工技术与工程—发酵工程]