检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:李雄峰 张奇 叶涛维 杨克虎[1,3] LI Xiong-feng;ZHANG Qi;YE Tao-wei;YANG Ke-hu(China University of Mining and Technology(Beijing),Beijing 100083,China;不详)
机构地区:[1]中国矿业大学(北京)机电与信息工程学院,北京100083 [2]奥尔堡大学工程与科学学院,奥尔堡9220 [3]“煤矿智能化与机器人创新应用”应急管理部重点实验室,北京100083
出 处:《电力电子技术》2023年第4期128-131,共4页Power Electronics
基 金:国家自然科学基金(61936008,61973307)。
摘 要:针对大功率有源中点箝位五电平(5L-ANPC)逆变器的低次谐波和电容电压平衡问题,提出一种基于特定谐波消除脉宽调制(SHEPWM)的模型预测控制(MPC)方法。首先,通过求解特定谐波消除(SHE)方程组得到全调制比下的所有开关角度,并设计目标函数选择其最优开关模式,实现SHE;然后,采用MPC方法,通过设计成本函数选择最佳开关状态,减小整体开关频率的同时实现电容电压和中点电位的平衡。硬件在环(HIL)实验结果验证了理论分析的正确性及控制策略的有效性。Aiming at the problems of low-order harmonics and capacitor voltage balance in high-power active neutralpoint-clamped five-level(5L-ANPC)inverters,a model predictive control(MPC)method based on selective harmonic elimination pulse width modulation(SHEPWM)is proposed.Firstly,all switching angles under full modulation ratio range are obtained by solving the unified selective harmonic elimination(SHE)equations,and the objective function is designed to select the optimal switching mode to achieve SHE.Then,the MPC method is used to select the best switching state by designing the cost function,so as to reduce the overall switching frequency and achieve the balance of the capacitor voltage and the neutral point potential.The hardware in loop(HIL)experimental results verify the correctness of the theoretical analysis and the effectiveness of the control strategy.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.7