检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:马烨 范端端 MA Ye;FAN Duan-duan(The Hong Kong University of Science and Technology,Shenzhen Institute of Collaborative Innovation(Futian,Shenzhen),Shenzhen 518000,China;Ocean Science(Zhuhai)Limited,Zhuhai 519000,China;Foshan Hkust Coating Limited,Foshan 528000,China)
机构地区:[1]香港科技大学深港协同创新研究院(深圳福田),广东深圳518000 [2]珠海市耕海科技有限公司,广东珠海519000 [3]佛山港科涂工技术有限公司,广东佛山528000
出 处:《应用化工》2023年第5期1384-1388,共5页Applied Chemical Industry
基 金:佛山科大专项资助(FSUST20-ETP03);河套深港科技创新合作区项目部分资助(HZQB-KCZYB-2020083)。
摘 要:探讨了天然环保防污剂丁烯酸内酯水包油乳状液的稳定性,从实验原料和制备工艺两方面筛选了乳化剂类型、复配比例、乳化剂用量、油相体积占比、pH值、乳化时间、乳化温度、搅拌速度等对乳状液稳定性的影响。结果表明,乳化剂阴离子和非离子型乳化剂复配比例1∶2,乳化剂添加比例为丁烯酸内酯质量5%,油相体积占比水油体积的30%,pH值控制在6.5,搅拌速度500 r/min,乳化时间20 min,乳化温度20℃时,乳化稳定性值最高,所制得的乳状液的稳定性较好。This article explores the stability of oil in water emulsion of butylene lactone,a natural environmental protection antifouling agent.The effects of emulsifier type,compounding ratio,emulsifier dosage,oil phase volume ratio,pH value change,emulsifying time,emulsifying temperature,stirring speed and other parameter variables on emulsion stability were screened from both experimental raw materials and preparation process.The result showed that the compounding ratio of emulsifier anionic and non-ionic emulsifier is 1∶2,the emulsifier addition ratio is 5%by mass of butylenactone,the oil phase volume accounts for 30%by volume of water and oil,the pH value is controlled at 6.5,the stirring speed is 500 r/min,the emulsifying time is 20 min,and the emulsifying temperature is 20℃,the emulsifying stability value is the highest,and the prepared emulsion has good stability.
关 键 词:天然环保防污剂 丁烯酸内酯水包油体系 乳状液稳定性
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:18.216.232.138