机构地区:[1]Key Laboratory for Intelligent Nano Materials and Devices of the Ministry of Education,State Key Laboratory of Mechanics and Control of Mechanical Structures,and Institute for Frontier Science,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China [2]CAS Key Laboratory of Nanophotonic Materials and Devices&Key Laboratory of Nanodevices and Applications,i-Lab,Suzhou Institute of Nano-Tech and Nano-Bionics(SINANO),Chinese Academy of Sciences,Suzhou 215123,China [3]School of Nano-Tech and Nano-Bionics,University of Science and Technology of China,Hefei 230026,China
出 处:《Science China Materials》2023年第6期2364-2371,共8页中国科学(材料科学(英文版)
基 金:supported by the Postgraduate Research and Practice Innovation Program of NUAA(xcxjh20210111);the National Natural Science Foundation of China(1210040808,61922082,and 12004180);the National Key Research and Development Program of China(2019YFA0705400);the Natural Science Foundation of Jiangsu Province(BK20210312 and BK20190018);the Fundamental Research Funds for the Central Universities(NS2020008 and NJ2019002);the Program for Innovative Talents and Entrepreneur in Jiangsu;the Research Fund for the State Key Laboratory of Mechanics and Control of Mechanical Structures(MCMS-I-0419G02);the Priority Academic Program Development of Jiangsu Higher Education Institutions。
摘 要:多层黑磷的带隙(~0.33 eV)覆盖~3.7微米光谱范围,在红外应用方面有巨大潜力.然而进一步降低带隙使其可用于远红外器件仍面临挑战.此外,黑磷材料及器件饱受空气稳定性差的困扰.因此,我们提出了同系物砷取代的策略,实现了对黑磷带隙的调控和稳定性的增强.通过优化化学气相传输的生长参数,我们制备出砷含量可控的毫米级黑磷母体.经扫描隧道显微镜和能谱分析,砷原子随机嵌入黑磷的主晶格中并保留了原有几近完美的晶格排列.对于60%砷含量的多层黑磷,其电学带隙降低至~0.16±0.02 eV并伴随强的p型掺杂.受益于较小的晶格畸变和强掺杂效应,基于砷取代黑磷的光电器件表现出高达约882 mA W^(-1)的光响应率,远超未取代的黑磷基光电器件(约314 mA W^(-1)).更为重要的是,砷取代的黑磷器件在暴露大气环境(温度~20℃;湿度~33%)48小时后未表现出明显的氧化迹象.本文为开发黑磷基、可长时间运行的光电探测器和光调制器件提供了新途径.Multilayer black phosphorus(BP)has been widely used in many infrared applications due to its narrow bandgap below 3.7-μm wavelength range.Approaches that reduce the bandgap to less than 0.33 eV would extend the cutoff wavelength and are of paramount importance.Moreover,the poor air stability of BP severely limits its practical applications.However,none of the current methods ensure effective bandgap tuning while enhancing air stability of BP for long-term device operation.This paper solved both problems by substituting BP with congener arsenic(As)atoms.We achieved millimeter-sized As-substituted BP(b-AsxP1−x)by optimizing the chemical vapor transport parameters,with As concentrations(x)varying as 0,0.3,0.4,0.5,and 0.6.According to the scanning tunneling microscopy results,arsenic atoms are resolved to be randomly embedded in the phosphorus host lattice,while maintaining a well-ordered lattice arrangement.Therefore,the electrical bandgap of pristine BP is narrowed to~0.16±0.02 eV for the b-As0.6P0.4 sample,accompanied by the accumulated p-doping and red-shifting BP Raman feature.Furthermore,the device based on b-As0.6P0.4 exhibits no signs of oxidation under ambient conditions(temperature~20°C;humidity~33%)for 48 h and shows a photoresponsivity of up to~882 mA W−1,exceeding the values of~314 mA W−1 for pristine BP devices due to the strong doping without obvious lattice distortion.Our findings indicate that arsenic-substituted BP has potential application in developing ambient-stable photodetectors and optical modulators.
关 键 词:扫描隧道显微镜 光电器件 光电探测器件 红外应用 红外器件 化学气相传输 空气稳定性 生长参数
分 类 号:TB34[一般工业技术—材料科学与工程] TN15[电子电信—物理电子学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...