夹料翻边及整形调试方法  

Debugging Method for Clamping Shaping Flanging and Sizing

作　　者：陈文锋 陈峤伊 Chen Wenfeng;Chen Jiaoyi(Sichuan Chengfei Integration Technology Co.,Ltd.,Chengdu,Sichuan 610091,CHN;Harbin Institute of Technology(Shenzhen),Shenzhen,Guangdong 518000,CHN)

机构地区：[1]四川成飞集成科技股份有限责任公司,四川成都610091 [2]哈尔滨工业大学(深圳),广东深圳518000

出　　处：《模具制造》2023年第7期6-8,共3页Die & Mould Manufacture

摘　　要：夹料翻边及整形工艺是模具制造过程中重要的工艺方法,这种工艺方法在顶盖天窗、门外板及侧围等汽车大型外覆盖件模具中使用较为广泛;对改进产品回弹和面品质量有较大的提升作用,通过调整夹料间隙的方式方法来改善外板回弹及面品质量有较为显著的效果。It is an important process method to use clamping flanging and sizing in the die manufacturing process.This process method is widely used in the die of large automobile outer covering parts,such as roof skylight,outer door panel and side wall;It will greatly improve the rebound of products and the quality of noodles.The method of adjusting the clamping gap to improve the rebound of the outer plate and the quality of the surface product has a relatively significant effect.

关 键 词：夹料 翻边 整形 调试方法 

分 类 号：TG385.2[金属学及工艺—金属压力加工]