大型磨机齿轮罩结构优化与风载分析  

Structural optimization and wind load analysis of large mill gear cover

作　　者：周洁 赵魏 王春红 刘洋 ZHOU Jie;ZHAO Wei;WANG Chunhong;LIU Yang(Luoyang Mining Machinery Engineering Design Institute Co.,Ltd.,Luoyang 471039,Henan,China;State Key Laboratory of Intelligent Mining Heavy Equipment,Luoyang 471039,Henan,China)

机构地区：[1]洛阳矿山机械工程设计研究院有限责任公司,河南洛阳471039 [2]智能矿山重型装备全国重点实验室,河南洛阳471039

出　　处：《矿山机械》2023年第8期44-50,共7页Mining & Processing Equipment

摘　　要：为解决大型磨机齿轮罩振颤造成的安全隐患,通过调整齿轮罩的支撑结构,改进齿轮罩罩体结构的刚度,并对改进前后齿轮罩模态进行有限元分析。结果表明,改进后的齿轮罩刚度得到了有效提高。针对特大型磨机露天使用工况,对优化后的齿轮罩进行了风载有限元分析,在烈风条件下,齿轮罩的强度和刚度满足室外露天使用要求。In order to solve the safety hazards caused by the vibration of the large mill gear cover,the support structure of the gear cover was adjusted,and the stiffness of the gear cover structure was improved.Then,the finite element analysis of the modal of the gear cover before and after optimization was carried out.The results showed that the stiffness of the optimized gear cover had been effectively enhanced.Aiming at the open-air working condition of the extra-large mill,the wind load finite element analysis of the optimized gear cover was carried out.Under strong wind conditions,the strength and stiffness of the gear cover met the requirements of outdoor open-air use.

关 键 词：大型磨机 齿轮罩 模态 风载 刚度 

分 类 号：TD453[矿业工程—矿山机电]