中厚板V型坡口GMAW电弧声信号焊缝偏差识别方法研究  

Study on Weld Seam Deviation Method of GMAW Arc Sound Signal in V-groove of Medium Thickness Plate

作　　者：岳建锋[1] 黄云龙 赵旺 刘文吉[1] 刘海华[1] 郗迎斌 YUE Jianfeng;HUANG Yunlong;ZHAO Wang;LIU Wenji;LIU Haihua;XI Yingbin(Tianjin Key Laboratory of Modern Mechatronics Equipment Technology,Tiangong University,Tianjin 300387,China;Hebei Yuehongzhiji Technology Development Co.,Ltd.,Hengshui 053000,Hebei,China)

机构地区：[1]天津工业大学天津市现代机电装备技术重点实验室,天津300387 [2]河北岳泓智机科技开发有限公司,河北衡水053000

出　　处：《机械科学与技术》2023年第9期1474-1481,共8页Mechanical Science and Technology for Aerospace Engineering

基　　金：天津市教委科研计划项目(2019KJ011&2019ZD07)。

摘　　要：针对中厚板V型坡口GMAW(熔化极气体保护焊)焊缝偏差识别问题,提出一种新型基于电弧声信号的中厚板GMAW摆动焊焊缝偏差识别方法。在V型坡口摆动焊接中,发现当摆动中心与焊缝中心出现偏差,电弧声信号呈现明显非对称性。为此,针对电弧声信号的时域和频域特征开展了进一步研究,明确了与焊缝偏差信号存在密切关联的电弧声摆动极限位置能量差、标准差、小波包第7频带和第8频带能量等特征参量。构建基于上述4类参量的GS-SVR非线性回归方程,通过电弧声特征信号检测,可实现焊接过程中焊接偏差信息的在线识别,通过左右偏差试验表明该模型具有良好精度,可满足工程实际生产需要。For the welding seam deviation recognition in GMAW welding of medium thickness plates,a weld seam deviation recognition method in GMAW swing welding of medium thickness plates based on arc sound signal is proposed.In V-groove swing welding,it is found that when the swing center deviates from the weld center,the arc sound signal presents obvious asymmetry.Therefore,the characteristics of arc sound signal in time domain and frequency domain were further studied,and the characteristic parameters,in which the energy difference of arc sound swing limit position,standard deviation,energy in the seventh and eighth band of wavelet packet were closely related to the weld seam deviation signal,were identified.The GS-SVR nonlinear regression equation based on the above four parameters was established.Through the detection of arc sound signal,the welding deviation information in the welding could be recognized online.The left and right deviation tests show that the model has good accuracy and can meet the requirement of production.

关 键 词：焊缝偏差 GMAW 电弧声 偏差识别 

分 类 号：TG409[金属学及工艺—焊接]