检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:杨爱英[1] 赵喆 李谦 Yang Aiying;Zhao Zhe;Li Qian(School of Optics and Photonics,Beijing Institute of Technology,Beijing 100081,China)
出 处:《光学学报》2023年第15期97-106,共10页Acta Optica Sinica
基 金:国家自然科学基金(61427813)。
摘 要:随着高速光通信信号速率的不断提高,电采样示波器所需的带宽也增加了。现有宽带高性能电采样示波器逐渐达到电子瓶颈决定的带宽极限。为了克服电子瓶颈,研制了基于光域采样技术的光采样示波器样机,其中软件同步算法的复杂度决定了样机测试的实时性。在基于啁啾z变换(CZT)的软件同步算法基础上,提出了基于选带傅里叶变换(ZoomFFT)的软件同步算法,进一步降低软件同步复杂度。与基于CZT的软件同步算法相比,基于ZoomFFT的软件同步算法所需实数乘法个数下降了68.8%。利用研制的光采样示波器样机,分别对不同速率的四电平脉冲幅度调制(PAM4)光信号、正交相移键控(QPSK)光信号进行了测量,并以宽带电采样示波器的测量结果进行对比,验证了光采样示波器能自适应地对不同速率的强度调制信号、相位调制信号进行测量。此外,为了表征光采样示波器本底噪声的影响,通过降低被测光通信信号功率,对Q因子进行了测量,结果表明,Q因子下降3 dB对应的灵敏度约为10 dB。Objective In optical communication,the measurement and analysis of high-speed optical communication signals are essential in developing high-speed optical communication devices,equipment,and systems.At present,the common equipment for time-domain measurement of high-speed optical signals is an optoelectronic hybrid broadband oscilloscope,which has a signal processing circuit limit bandwidth of about 90 GHz and requires complex clock synchronization circuitry.Additionally,this type of oscilloscope also has disadvantages such as opaque signal rate and modulation format,complex system composition,and expensive price.To overcome this electronic bottleneck,we develop an optical sampling oscilloscope prototype based on optical domain sampling technology.The oscilloscope adopts a software synchronization algorithm,and the measurable signal bandwidth is up to THz without the requirement for high-speed photodetectors,which lowers the bandwidth requirements of the clock synchronization circuit and subsequent processing circuits.The limitation of the electronic bottleneck is also overcome.However,since we previously adopt a software synchronization algorithm based on chirped z-transform(CZT),its complexity affects the signal processing timeliness.To improve the signal processing efficiency and enhance the equipment practicability,it is necessary to study a less complex software synchronization algorithm suitable for optical sampling oscilloscopes.Methods Generally,after the optical signal is asynchronously down-frequency optically sampled with a fixed frequency difference,the eye diagram reconstruction algorithm based on software synchronization can be employed to realize parameter measurement of high-speed optical data signals related to the eye diagram recovery,constellation diagram,and signal statistical characteristics(Fig.2).The key to the entire software synchronous eye diagram reconstruction algorithm is to accurately obtain the down-frequency equivalent sampling time step parameterΔt of asynchronous down-frequency
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222