检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:万长东[1] 戴晨旭 鲁春艳[1] 王敏[1] WAN Changdong;DAI Chenxu;LU Chunyan;WANG Min(School of Mechanical and Electrical Engineering,Suzhou Vocational University,Suzhou Jiangsu 215104,China;Defeat Software Technology(Suzhou)Co.,Ltd.,Suzhou Jiangsu 215104,China)
机构地区:[1]苏州市职业大学机电工程学院,江苏苏州215104 [2]德菲特软件科技(苏州)有限公司,江苏苏州215104
出 处:《电源技术》2023年第9期1235-1238,共4页Chinese Journal of Power Sources
基 金:苏州市重点产业技术创新项目(SYG202044);苏州市农业应用基础研究项目(SNG2021036);苏州市职业大学“青蓝工程”(202105000008)。
摘 要:某动力电池箱体在随机振动试验中提示了结构强度存在风险,并期望箱体减重,为改善其性能及其轻量化需求,开展了动力电池箱体结构的有限元仿真分析与多目标优化设计。建立了动力电池箱体动静态特性模型,通过三种典型工况分析和模态分析原有结构的不足,并通过布置膨胀胶的方式弥补了该缺陷。以动力电池箱体4个关键部件的厚度为设计变量,以箱体结构的总质量、一阶模态、最大应力和最大变形量为设计响应,建立了动力电池箱体多目标优化设计模型。并利用最优拉丁超立方试验设计、径向基(radial basis function,RBF)神经网络近似模型拟合及NSGA-II优化算法进行了轻量化分析。分析结果表明:在满足动力电池箱体动静态特性性能指标的前提下,箱体质量减轻了10.2%,实现了箱体结构的轻量化。The random vibration test results of a power battery box indicated the risk,and the weight of the box was expected to be reduced.In order to improve the performance and lightweight requirements,the finite element simulation analysis and multi-objective optimization design of the power battery box structure were carried out.Firstly,the dynamic and static characteristic model of the power battery box was established,and the deficiencies of the original structure were analyzed based on three typical working conditions and modes,and the deficiencies were made up by means of expanding glue.Then,with the thickness of the four key components of the power battery box as the design variables,and the total mass,first-order modal,maximum stress and maximum deformation of the box structure as the design responses,a multi-objective optimal design of the power battery box was established.The lightweight analysis was carried out by using the optimal Latin hypercube experimental design,RBF(radial basis function)approximate model fitting,and NSGA-II optimization algorithm.The analysis results show that:under the premise of satisfying the dynamic and static characteristics of the power battery box,the box mass is reduced by 10.2%,and the box structure is lightened.
分 类 号:TM912[电气工程—电力电子与电力传动]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:18.223.162.245