基于UG等高策略的铝合金模具数控编程与加工  

NC programming and manufacturing of aluminum alloy dies based on UG contour strategy

作　　者：张立昌 申鹏[2] ZHANG Li-chang;SHEN Peng(Xi'an Engineering University,Xi‘an 710600,Shaanxi,China;Shaanxi Institute of Technology,Xi'an 710300,Shaanxi,China)

机构地区：[1]西安工程大学工程训练中心,陕西西安710600 [2]陕西国防工业职业技术学院智能制造学院,陕西西安710300

出　　处：《模具技术》2023年第5期62-66,共5页Die and Mould Technology

基　　金：陕西省教育科学“十三五”规划2020年度课题(编号:SGH20Y1102);陕西省教育科学“十四五”规划2021年度课题(编号:SGH21Y0100)。

摘　　要：铝合金模具在实际应用中产品成型生产效率高、表面质量好,但同时其制造工艺及制造精度要求极高。采用UG软件,针对某水果包装模具,结合实际生产条件制定优化加工工艺,通过UG等高策略编制加工程序,并仿真模拟,验证刀路正确性。根据优化程序生产出合格模具,并检测证明该模具制作精度达到工艺要求。Aluminum alloy molds have high molding rate and good surface quality in practical applications,but at the same time,their manufacturing process and precision requirements are extremely high.Using UG software,optimize the processing technology for a fruit packaging mold based on actual production conditions,compile a processing program through UG contour strategy,and simulate to verify the correctness of the cutter path.According to the optimization program,a qualified mold was produced,and the inspection showed that the manufacturing accuracy of the mold met the process requirements.

关 键 词：铝合金模具 UG 加工工艺 数控编程 

分 类 号：TG659[金属学及工艺—金属切削加工及机床]